Order Products : sales@su-jiao.com

Exelene® PP H3500

Category:	PP Homopolymer , Polypropylene Homopolymer
Manufacturer:	Montachem International, Inc.
Trademark:	Exelene® PP
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	NgIREk_Exelene-PP-H3500.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

WECHAT

Message

Applications:

Caps, toys, Small kitchen utensils, Trays with thin surfaces, containers for cosmetics

Characteristics:

The Exelene resin PP H3500 meets the requirements of section 177.1520, paragraph C, from chapter 21 denominated "Olefin Polymers" from the Code of Federal Regulations of the FDA, to be utilized with direct food contact.

General Information
Additive	Antioxidant
Features	Antioxidant Homopolymer
Uses	Caps Cosmetics Food Service Applications Household Goods Non-specific Food Applications Toys
Agency Ratings	FDA 21 CFR 177.1520(c)
Processing Method	Injection Molding

Physical	Nominal Value	Unit	Test Method
Specific Gravity	0.898	g/cm³	ASTM D792
Melt Mass-Flow Rate (MFR) (230°C/2.16 kg)	35	g/10 min	ASTM D1238

Hardness	Nominal Value	Unit	Test Method
Rockwell Hardness (R-Scale, 23°C)	105		ASTM D785

Mechanical	Nominal Value	Unit	Test Method
Tensile Strength ¹(Yield)	33.8	MPa	ASTM D638
Tensile Elongation ²(Yield)	8.0	%	ASTM D638
Flexural Modulus - 1% Secant ³(3.20 mm)	1240	MPa	ASTM D790B

Impact	Nominal Value	Unit	Test Method
Notched Izod Impact (23°C, 3.20 mm)	21	J/m	ASTM D256A

Thermal	Nominal Value	Unit	Test Method
Deflection Temperature Under Load ⁴(0.45 MPa, Unannealed)	100	°C	ASTM D648

Note Message
1 .	Type IV, 50 mm/min
2 .	Type IV, 50 mm/min
3 .	Method I (3 point load), 13 mm/min
4 .	2°C/min

Resin Grade	Manufacturer	Category	Trademark
Maxelast® P3653T	Nantong Polymax Elastomer Technology, Co., Ltd	TPE	Maxelast®
Vexel 4450	Custom Resins Group	PBT	Vexel
Xuchuan XCW-6400M	Xuchuan Chemical (Suzhou) Co., Ltd	PUR, Unspecified	Xuchuan
Paracril® AJLT	INSA	NBR	Paracril®
Dryflex® SE 40A301	ELASTO	TPE	Dryflex®