Order Products : sales@su-jiao.com
Greenflex® FD 23 F
| Category: | EVA , Ethylene Vinyl Acetate Copolymer |
| Manufacturer: | Versalis S.p.A. |
| Trademark: | Greenflex® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | NdeGgc_GreenflexFD23F.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Greenflex FD 23 F is an ethylene vinyl acetate copolymer (EVA) suitable for blown film extrusion. Greenflex FD 23 F represents the additivated version with slip and antiblocking of Greenflex FD 20 F. Films produced from Greenflex FD 23 F exhibit good optical properties, high impact resistance, tensile strength, elongation at break and low creep. Main Application Greenflex FD 23 F is recommended for thermo-shrinkable films and multilayer stretch films for food packaging, included deep-frozen food packaging. |
| General Information | |
|---|---|
| Additive |
|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.924 | g/cm³ | ISO 1183 |
| Melt Mass-Flow Rate (MFR) (190°C/2.16 kg) | 0.50 | g/10 min | ISO 1133 |
| Vinyl Acetate Content | 5.0 | wt% | Internal method |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness | ISO 868 | ||
| Shore A, Injection Molding | 95 | ISO 868 | |
| Shore D, Injection Molding | 44 | ISO 868 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Coefficient of Friction (vs. Itself - Dynamic, Blown Film) | > 0.20 | ISO 8295 |
| Films | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Film Thickness - Recommended / Available | 30 to 150 µm | ||
| Tensile Modulus | ISO 527-3 | ||
| 1% sectioning, MD : Blown film | 120 | MPa | ISO 527-3 |
| 1% sectioning, TD : Blown film | 125 | MPa | ISO 527-3 |
| Tensile Stress | ISO 527-3 | ||
| MD : yield, blow film | 8.00 | MPa | ISO 527-3 |
| TD : yield, blow film | 8.00 | MPa | ISO 527-3 |
| MD : fracture, blow film | 25.0 | MPa | ISO 527-3 |
| TD : fracture, blow film | 25.0 | MPa | ISO 527-3 |
| Tensile Elongation | ISO 527-3 | ||
| MD : fracture, blow film | 450 | % | ISO 527-3 |
| TD : fracture, blow film | 600 | % | ISO 527-3 |
| Dart Drop Impact 1(Blown Film) | 420 | g | ISO 7765-1/A |
| Elmendorf Tear Strength 2 | ISO 6383-2 | ||
| MD | 26.0 | kN/m | ISO 6383-2 |
| TD | 40.0 | kN/m | ISO 6383-2 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Brittleness Temperature | < -80.0 | °C | ASTM D746 |
| Vicat Softening Temperature | 85.0 | °C | ISO 306/A |
| Melting Temperature | 104 | °C | Internal method |
| Optical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Gloss (45°, Blown Film) | 75 | ASTM D2457 | |
| Haze (Blown Film) | 3.0 | % | ISO 14782 |
| Extrusion | Nominal Value | Unit | |
|---|---|---|---|
| Melt Temperature | 170 - 200 | °C |
| Note Message | |
|---|---|
| 1 . | F50 |
| 2 . | Blown Film |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Sylvin 9658-40 Clear | Sylvin Technologies Incorporated | PVC, Unspecified | Sylvin |
| NuSil CV2-1147 | NuSil Technology | Silicone | NuSil |
| ASI POLYETHYLENE LP 554-01 | A. Schulman Inc. | HDPE | ASI POLYETHYLENE |
| AVALON® 80 ABU | Huntsman Corporation | TPU-Polyester | AVALON® |
| Lytex 4129 | Quantum Composites Inc. | Epoxy | Lytex |
