Order Products : sales@su-jiao.com
ESENTTIA 05C06
| Category: | PP Impact Copolymer , Polypropylene Impact Copolymer |
| Manufacturer: | Polipropileno del Caribe S.A. |
| Trademark: | ESENTTIA |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | NdIPlU_ESENTTIA-05C06.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Characteristics: Control reologhy Impact block copolymer polypropylene; high impact/stiffness balance; good thermal stability and chemicals resistance. Recommended for: Injection molding of batteries cases, buckets, industrial parts, toys, containers; injection and extrusion molding general purpose applications. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Melt Mass-Flow Rate (MFR) 1(230°C/2.16 kg) | 5.0 | g/10 min | ASTM D1238 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength 2(Yield, 3.20 mm, Injection Molded) | 22.8 | MPa | ASTM D638 |
| Tensile Elongation 3(Yield, 3.20 mm, Injection Molded) | 8.2 | % | ASTM D638 |
| Flexural Modulus - 1% Secant 4(3.20 mm, Injection Molded) | 1000 | MPa | ASTM D790A |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact (23°C, 3.20 mm, Injection Molded) | 240 | J/m | ASTM D256A |
| Gardner Impact 5(-30°C, 3.20 mm, Injection Molded) | 31.6 | J | ASTM D5420 |
| Note Message | |
|---|---|
| 1 . | Procedure B |
| 2 . | Type I, 50 mm/min |
| 3 . | Type I, 50 mm/min |
| 4 . | Type I, 1.3 mm/min |
| 5 . | Method A |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| RALUPOL® UP 802 | RASCHIG GmbH | Polyester, TS | RALUPOL® |
| EXCEVAL™ RS-2817SB | Kuraray Co., Ltd. | EVA | EXCEVAL™ |
| KumhoSunny PC 2502NH | Shanghai KumhoSunny Plastics Co., Ltd. | PC | KumhoSunny PC |
| Sumiliteresin® PR-1051 I | SBHPP | Phenolic | Sumiliteresin® |
| ULTEM™ 1010R resin | SABIC Innovative Plastics | PEI | ULTEM™ |
