Order Products : sales@su-jiao.com
POLYelast TPE ED80 D40 UV
| Category: | PP+EPDM , Polypropylene + EPDM Rubber |
| Manufacturer: | Polykemi AB |
| Trademark: | POLYelast |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | Ncbn0o_POLYelast-TPE-ED80-D40-UV.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| POLYelast TPE ED80 D40 UV is a Polypropylene + EPDM Rubber (PP+EPDM) product. It is available in Asia Pacific or Europe. |
| General Information |
|---|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.910 | g/cm³ | ISO 1183 |
| Melt Mass-Flow Rate (MFR) (230°C/2.16 kg) | 8.0 | g/10 min | ISO 1133 |
| Molding Shrinkage | ISO 294-4 | ||
| Across Flow | 1.8 to 2.2 | % | |
| Flow | 1.8 to 2.2 | % |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore D, 15 sec) | 40 | ASTM D2240 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress | 10.0 | MPa | ISO 527-2 |
| Tensile Strain (Yield) | 9.0 | % | ISO 527-2 |
| Flexural Modulus (23°C) | 450 | MPa | ISO 178 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Charpy Notched Impact Strength (23°C) | 27 | kJ/m² | ISO 179 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Heat Deflection Temperature 1(0.45 MPa, Unannealed) | 50.0 | °C | ISO 75-2/B |
| Vicat Softening Temperature | 100 | °C | ISO 306/A50 |
| Note Message | |
|---|---|
| 1 . | 120°C/hr |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| NuSil MED-4550 | NuSil Technology | Rubber | NuSil |
| Bergamid™ BG6000-8032 RS NC001 | PolyOne Corporation | Nylon 6 | Bergamid™ |
| Celstran® TPU-GF40-01 | Celanese Corporation | TPU, Unspecified | Celstran® |
| Hifax CA 217 A | LyondellBasell Industries | PP Copolymer | Hifax |
| HiPrene® HT42WGT | GS Caltex | PP, Unspecified | HiPrene® |
