Order Products : sales@su-jiao.com

Eltex® TUB123N6000

Category:	HDPE Copolymer , High Density Polyethylene Copolymer
Manufacturer:	INEOS Olefins & Polymers Europe
Trademark:	Eltex®
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	NYVGQc_Eltex-TUB123N6000.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

WECHAT

Message

Eltex® TUB123N6000 is a high-density polyethylene copolymer designed for the co-extrusion of an external UV protective layer for pressure pipes.

Characteristics

White high density extrusion compound with excellent UV resistance, lower surface temperature in high solar radiation and high stress cracking resistance.

Applications

Protective external layer for RTP and other pressure pipe.

General Information
Features	Copolymer Good UV Resistance High ESCR (Stress Crack Resist.)
Uses	Piping
Appearance	White

Physical	Nominal Value	Unit	Test Method
Density	0.980	g/cm³	ISO 1183/A
Melt Mass-Flow Rate (MFR) (190°C/5.0 kg)	0.33	g/10 min	ISO 1133

Mechanical	Nominal Value	Unit	Test Method
Tensile Stress (Yield, 23°C)	19.0	MPa	ISO 527-2/50
Tensile Strain ¹(Break, 23°C)	> 350	%	ISO 527-2/50

Thermal	Nominal Value	Unit	Test Method
Vicat Softening Temperature	127	°C	ISO 306
Thermal Stability - OIT			ISO 11357-6
210°C ²	> 20	min
210°C	> 60	min

Note Message
1 .	After Weathering: Based on VW-Audi Protocol PV 3929 'Kalahari Test', irradiation 290 to 400 nm, 68 W/m², 20% RH (no sprinkling). Duration 2,500 h instead of standard 155 h
2 .	After Weathering: Based on VW-Audi Protocol PV 3929 'Kalahari Test', irradiation 290 to 400 nm, 68 W/m², 20% RH (no sprinkling). Duration 2,500 h instead of standard 155 h

Resin Grade	Manufacturer	Category	Trademark
Nylene® 5133-02	Custom Resins Group	Nylon 66	Nylene®
Andur 9000 AS/Curative	Anderson Development Company	PUR-TDI	Andur
Celanex® 5200-2	Celanese Corporation	PBT	Celanex®
Keltan® 5470	LANXESS Buna GmbH	EPDM	Keltan®
Osterlene® LD07520A	Osterman & Company	LDPE	Osterlene®