Order Products : sales@su-jiao.com
VisiJet® M3 Proplast
| Category: | Unspecified , Unspecified |
| Manufacturer: | 3D Systems |
| Trademark: | VisiJet® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | NYRhN4_VisiJet-M3-Proplast.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
VisiJet Proplast Plastic Material (white/natural color) provides an economical solution for general models. In addition, this material is commonly used for sacrificial patterns for numerous direct casting applications. |
| General Information | |
|---|---|
| Uses |
|
| Appearance |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density 1 | 1.02 | g/cm³ | ASTM D4164 |
| Ash Content | 0.010 | % |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Modulus | 1110 | MPa | ASTM D638 |
| Tensile Strength | 26.2 | MPa | ASTM D638 |
| Tensile Elongation (Break) | 9.0 | % | ASTM D638 |
| Flexural Strength | 26.6 | MPa | ASTM D790 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load (0.45 MPa, Unannealed) | 46.0 | °C | ASTM D648 |
| Additional Information |
|---|
| ProJet Compatability: SD, HD |
| Note Message | |
|---|---|
| 1 . | Liquid @ 80 °C |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| SEETEC EVA VS430 | Lotte Chemical Corporation | EVA | SEETEC EVA |
| TAIRIPRO T1002 | Formosa Plastics Corporation | PP Homopolymer | TAIRIPRO |
| TAROMID A 280 Z2 | Taro Plast S.p.A. | Nylon 66 | TAROMID A |
| Bergamid™ A700 G20 U-SO | PolyOne Corporation | Nylon 66 | Bergamid™ |
| Plenco 04527 (Transfer) | Plastics Engineering Co. | Phenolic | Plenco |
