Order Products : sales@su-jiao.com
EnCom M20 PBET
| Category: | Polyester, TP , Thermoplastic Polyester |
| Manufacturer: | EnCom, Inc. |
| Trademark: | EnCom |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | NV3k8D_EnCom-M20-PBET.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Mineral Filled Polyester |
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Uses |
|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.50 | g/cm³ | ASTM D792 |
| Melt Mass-Flow Rate (MFR) (275°C/2.16 kg) | 60 | g/10 min | ASTM D1238 |
| Molding Shrinkage - Flow (3.18 mm) | 1.3 | % | ASTM D955 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength (Yield) | 66.2 | MPa | ASTM D638 |
| Flexural Modulus | 4100 | MPa | ASTM D790 |
| Flexural Strength (Yield) | 103 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact (23°C) | 37 | J/m | ASTM D256 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load | ASTM D648 | ||
| 0.45 MPa, Unannealed | 186 | °C | |
| 1.8 MPa, Unannealed | 104 | °C | |
| CLTE - Flow | 3.1E-5 | cm/cm/°C | ASTM D696 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 121 | °C | |
| Drying Time | 2.0 to 4.0 | hr | |
| Suggested Max Moisture | 0.020 | % | |
| Rear Temperature | 260 to 288 | °C | |
| Middle Temperature | 266 to 302 | °C | |
| Front Temperature | 271 to 310 | °C | |
| Nozzle Temperature | 277 to 310 | °C | |
| Processing (Melt) Temp | 277 to 310 | °C | |
| Mold Temperature | 93.3 to 116 | °C |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Ryton® V-1 | Solvay Specialty Polymers | PPS | Ryton® |
| Spartech Polycom SC5-2010 | Spartech Polycom | PP Copolymer | Spartech |
| Elastollan® R 2000 | BASF Polyurethanes GmbH | TPU-Polyester | Elastollan® |
| GERMAMID 6 MF 30 | Kunststoff-Kontor-Hamburg GmbH | Nylon 6 | GERMAMID |
| Sylvin 8280-90 Grey 9583 | Sylvin Technologies Incorporated | PVC, Unspecified | Sylvin |
