Order Products : sales@su-jiao.com
Elastocon® CLR65
| Category: | TPE , Thermoplastic Elastomer |
| Manufacturer: | Elastocon TPE Technologies |
| Trademark: | Elastocon® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | NTOXTv_Elastocon-CLR65.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Elastocon® CLR65 is a transparent thermoplastic elastomer that has been developed for applications that require oil/plasticizer free, non-blooming high strength properties and a tactile surface finish. Elastocon?? CLR65 is FDA compliant and well suited for consumer goods and industrial applications requiring U.V. stability. Elastocon?? CLR65 can be overmolded onto polypropylene. Elastocon® CLR65 is supplied as ready to use pellets in 1000 lb. quantities. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| Appearance |
|
| Forms |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 0.890 | g/cm³ | ASTM D792 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore A) | 62 | ASTM D2240 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress (100% Strain) | 2.20 | MPa | ASTM D412 |
| Tensile Strength (Yield) | 8.60 | MPa | ASTM D412 |
| Tensile Elongation (Break) | 630 | % | ASTM D412 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Rear Temperature | 166 - 177 | °C | |
| Front Temperature | 182 - 188 | °C | |
| Nozzle Temperature | 193 - 204 | °C | |
| Mold Temperature | 21.1 - 37.8 | °C | |
| Injection Rate | Fast | ||
| Back Pressure | 0.689 - 1.38 | MPa |
| Injection instructions |
|---|
| Elastocon® CLR40 thermoplastic elastomer compound does not require drying. |
| Extrusion | Nominal Value | Unit | |
|---|---|---|---|
| Hopper Temperature | < 79.4 | °C | |
| Cylinder Zone 1 Temp. | 149 - 177 | °C | |
| Cylinder Zone 2 Temp. | 149 - 177 | °C | |
| Cylinder Zone 3 Temp. | 149 - 177 | °C | |
| Cylinder Zone 4 Temp. | 149 - 177 | °C | |
| Cylinder Zone 5 Temp. | 149 - 177 | °C | |
| Die Temperature | 149 - 177 | °C |
| Extrusion instructions |
|---|
| Compression ratio: 2.5 to 3.0 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Moplen HP640J | LyondellBasell Industries | PP Homopolymer | Moplen |
| ADENE NHQB | A.D. Compound spa | PP Homopolymer | ADENE |
| Geon™ Vinyl Flexible XV3878G | PolyOne Corporation | PVC+NBR | Geon™ Vinyl Flexible |
| Hanwha Total PE E120A | HANWHA TOTAL PETROCHEMICALS Co., Ltd. | EVA | Hanwha Total PE |
| OPTODYNE™ UV-2100 | DAIKIN AMERICA, INC. | Epoxy | OPTODYNE™ |
