Order Products : sales@su-jiao.com
Multiuse Leostomer® LJ-3150N
| Category: | TPU, Unspecified , Thermoplastic Polyurethane Elastomer |
| Manufacturer: | Riken Technos Corp. |
| Trademark: | Multiuse Leostomer® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | NPp1PY_Multiuse-Leostomer-LJ-3150N.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Multiuse Leostomer®LJ-3150N is a thermoplastic polyurethane elastomer product,. It can be processed by injection molding and is available in North America or Asia Pacific. Features include:
|
| General Information | |
|---|---|
| Features |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.938 | g/cm³ | ISO 1183 |
| Melt Mass-Flow Rate (MFR) (230°C/2.16 kg) | 4.0 | g/10 min | ISO 1133 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore A, 15 sec) | 50 | ISO 868 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress (100% Strain) | 1.40 | MPa | ISO 37 |
| Tensile Stress (Yield) | 10.6 | MPa | ISO 37 |
| Tensile Elongation (Break) | 960 | % | ISO 37 |
| Tear Strength | 29 | kN/m | ISO 34-1 |
| Compression Set | ISO 815 | ||
| -- | 46 | % | ISO 815 |
| 70°C, 22 hr | 38 | % | ISO 815 |
| Aging | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Change in Tensile Strength (50°C, 24 hr, in IRM 902 oil) | -12 | % | ISO 1817 |
| Change in Tensile Strain at Break (50°C, 24 hr, in IRM 902 oil) | 13 | % | ISO 1817 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Brittleness Temperature | -60.0 | °C | ISO 974 |
| Additional Information |
|---|
| The values listed above are tested in accordance with JIS K test methods.Injection speedFast0Rebound Resilience: 42%Die Temperature: 20 to 40°CInjection Pressure: LowMaintained Pressure: LowBack Pressure: Low |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Rear Temperature | 180 | °C | |
| Middle Temperature | 190 | °C | |
| Front Temperature | 200 | °C | |
| Nozzle Temperature | 200 | °C | |
| Processing (Melt) Temp | 180 - 220 | °C | |
| Injection Rate | Fast |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Niuk 10TE15 | Shanghai Niuk New Plastic Technology Co., Ltd. | PP, Unspecified | Niuk |
| Huafon HF-1398A | Huafon Group Co., Ltd. | TPU-Polyester | Huafon |
| LNP™ COLORCOMP™ R1000S compound | SABIC Innovative Plastics | Nylon 66 | LNP™ COLORCOMP™ |
| LNP™ STAT-LOY™ M3000C compound | SABIC Innovative Plastics | PP, Unspecified | LNP™ STAT-LOY™ |
| LUVOCOM® 1-8562 | Lehmann & Voss & Co. | Nylon 66 | LUVOCOM® |
