Order Products : sales@su-jiao.com
Mytex® AS525K(W)-01
| Category: | PP, Unspecified , Polypropylene |
| Manufacturer: | Mytex Polymers |
| Trademark: | Mytex® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | NPl6qP_Mytex-AS525K-W--01.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Glass/Mineral filled compounded polypropylene produced for automotive applications using Mytex® technology. This grade is not UV stabilized. The (W) is for underhood and high heat stability applications only. |
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Features |
|
| Uses |
|
| Forms |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.28 | g/cm³ | ASTM D792 |
| Melt Mass-Flow Rate (MFR) (230°C/2.16 kg) | 9.0 | g/10 min | ASTM D1238 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength (Yield) | 85.0 | MPa | ASTM D638 |
| Flexural Modulus - Tangent | 6200 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact (23°C) | 73 | J/m | ASTM D256 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load (1.8 MPa, Unannealed) | 145 | °C | ASTM D648 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| POLYPRO® FB2511 | YUHWA Korea Petrochemical Ind. Co., Ltd. | PP Copolymer | POLYPRO® |
| Tecomid® NB40 MF20 GR003 FY70 | Eurotec Engineering Plastics | Nylon 6 | Tecomid® |
| ENVIROPLAS® ENV42-NC740 | ENVIROPLAS®, Inc. | PEI+PC | ENVIROPLAS® |
| Lucent PA NP6-140 | Lucent Polymers, Inc. | Nylon 66 | Lucent PA |
| Sarlink® TPE FM-2166 | Teknor Apex Company | TPE | Sarlink® TPE |
