Tecnoflon® TN

Category:	Fluorelastomer , Fluoroelastomer
Manufacturer:	Solvay Specialty Polymers
Trademark:	Tecnoflon®
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	NO2vZn_Tecnoflon-TN.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

Message
TECNOFLON® TN is a high viscosity fluoroelastomer terpolymer. TN is well suited for applications requiring better chemical resistance and/or long term heat resistance compared to fluoroelastomer copolymers. It can be blended with other polymers of the Tecnoflon® family to meet specific requirements. TN does not contain curatives, therefore the proper levels of Tecnoflon® FOR M1 and Tecnoflon® FOR M2 must be added to achieve required properties. It can also be cured with diamines. Some of the basic properties of TECNOFLON® TN are: Excellent chemical resistance Good compression set Excellent mould release Lack of mould fouling Superior mould flow Tecnoflon® TN can be used for compression and transfer molding of shaft seals, valve stem seals, O-rings, gaskets, seals or any item requiring excellent chemical resistance. Tecnoflon® TN can be combined with the cure system and other typical fluoroelastomer compounding ingredients. Mixing can be accomplished with two-roll mills or internal mixers. This material can be extruded into hoses or profiles and can be calendered to make sheet stocks or belting. Finished goods can be produced by a variety of rubber processing methods.

Message

TECNOFLON® TN is a high viscosity fluoroelastomer terpolymer. TN is well suited for applications requiring better chemical resistance and/or long term heat resistance compared to fluoroelastomer copolymers. It can be blended with other polymers of the Tecnoflon® family to meet specific requirements. TN does not contain curatives, therefore the proper levels of Tecnoflon® FOR M1 and Tecnoflon® FOR M2 must be added to achieve required properties. It can also be cured with diamines.

Some of the basic properties of TECNOFLON® TN are:

Excellent chemical resistance

Good compression set

Excellent mould release

Lack of mould fouling

Superior mould flow

Tecnoflon® TN can be used for compression and transfer molding of shaft seals, valve stem seals, O-rings, gaskets, seals or any item requiring excellent chemical resistance. Tecnoflon® TN can be combined with the cure system and other typical fluoroelastomer compounding ingredients. Mixing can be accomplished with two-roll mills or internal mixers.
This material can be extruded into hoses or profiles and can be calendered to make sheet stocks or belting. Finished goods can be produced by a variety of rubber processing methods.

General Information
Features	Good Chemical Resistance Good Flow Good Heat Aging Resistance Good Mold Release High Viscosity Low Compression Set Terpolymer
Uses	Belts/Belt Repair Blending Gaskets Hose Profiles Seals Sheet Valves/Valve Parts
Appearance	Translucent
Forms	Pellets
Processing Method	Calendering Compounding Compression Molding Extrusion Resin Transfer Molding

Physical	Nominal Value	Unit
Mooney Viscosity ¹(ML 1+10, 121°C)	67	MU
Fluorine Content ²	68	%

Note Message
1 .	Raw polymer
2 .	Raw polymer

Resin Grade	Manufacturer	Category	Trademark
SABIC® LDPE PCG80	Saudi Basic Industries Corporation (SABIC)	LDPE	SABIC® LDPE
Sylvin 9743-60 Black	Sylvin Technologies Incorporated	PVC, Unspecified	Sylvin
ALTECH® PP-H A 4940/506 MR40	ALBIS PLASTIC GmbH	PP Homopolymer	ALTECH® PP-H
Electrafil® PC NCF15 FR	Techmer Engineered Solutions	PC	Electrafil®
KOPA® KN331F	Kolon Plastics, Inc.	Nylon 66	KOPA®