Order Products : sales@su-jiao.com
陶氏低密度聚乙烯 208C
| Category: | LDPE , Low Density Polyethylene |
| Manufacturer: | The Dow Chemical Company |
| Trademark: | DOW™ LDPE |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | NLbYuS_x-208C.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
DOW™ LDPE 208C is a Low Density Polyethylene Resin material. It is available in Latin America. Primary attribute of DOW™ LDPE 208C: Slip. Typical application of DOW™ LDPE 208C: Food Contact Applications |
| General Information | |
|---|---|
| Additive |
|
| Agency Ratings |
|
| Forms |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.925 | g/cm³ | ASTM D1505 |
| Melt Mass-Flow Rate (MFR) (190°C/2.16 kg) | 0.70 | g/10 min | ASTM D1238 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Coefficient of Friction | ASTM D1894 | ||
| vs. Itself - Dynamic | 0.14 | ||
| vs. Itself - Static | 0.19 |
| Films | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Film Thickness - Tested | 50 | µm | |
| Film Puncture Resistance (50 µm) | 4.00 | J/cm³ | Internal Method |
| Tensile Strength | ASTM D882 | ||
| MD : Yield, 50 µm | 11.0 | MPa | |
| TD : Yield, 50 µm | 10.0 | MPa | |
| MD : Break, 50 µm | 21.0 | MPa | |
| TD : Break, 50 µm | 23.0 | MPa | |
| Tensile Elongation | ASTM D882 | ||
| MD : Break, 50 µm | 520 | % | |
| TD : Break, 50 µm | 850 | % | |
| Dart Drop Impact (50 µm) | 180 | g | ASTM D1709A |
| Elmendorf Tear Strength | ASTM D1922 | ||
| MD : 50 µm | 280 | g | |
| TD : 50 µm | 240 | g |
| Optical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Gloss (45°, 50.0 µm) | 53 | ASTM D2457 | |
| Haze (50.0 µm) | 9.0 | % | ASTM D1003 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Processing (Melt) Temp | 205 | °C |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| RTP 1499 P X 125056 B | RTP Company | PPSU | RTP |
| SABIC® PPcompound 57F9722 | Saudi Basic Industries Corporation (SABIC) | PP Copolymer | SABIC® PPcompound |
| Rhelon G1533H-00 | RheTech, Inc. | Nylon 6 | Rhelon |
| Altuglas® Luctor™ HI | Altuglas International of Arkema Inc. | Acrylic (PMMA) | Altuglas® Luctor™ |
| EPO-TEK® 354-T | Epoxy Technology Inc. | Epoxy | EPO-TEK® |
