Order Products : sales@su-jiao.com
POLYFLON™ M-18F
| Category: | PTFE , Polytetrafluoroethylene |
| Manufacturer: | Daikin Fluorochemicals (China) Co., Ltd. |
| Trademark: | POLYFLON™ |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | NLI0Y4_POLYFLON-M-18F.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
POLYFLON PTFE M-series is a granular powder for compression molding. As melt viscosity is extremely high, it cannot be used for molding applied to general plastic. Therefore basically at first it is compressed in the mold and is fused by sintering over its melting point. Various molding methods are developed. There are many types of POLYFLON PTFE to be applied the methods, conditions in mold processing and application. Features Because of the small particle size and sharp particle size distribution, molding articles show excellent properties. Suitable for compound with various fillers as the base powder. |
| General Information | |
|---|---|
| Features |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | |
|---|---|---|---|
| Apparent Density | 0.33 | g/cm³ | |
| Average Particle Size | 25 | µm |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Sindustris PC GN1003FC | Sincerity Australia Pty Ltd. | PC | Sindustris PC |
| Viton® A-275C | DuPont Performance Elastomers | Fluorelastomer | Viton® |
| ALTECH® PA66 A 2030/109 GF30 | ALBIS PLASTIC GmbH | Nylon 66 | ALTECH® PA66 |
| Daplen™ ED306UBB | Borealis AG | TPO | Daplen™ |
| ENVIROPLAS® ENV17-NC840 | ENVIROPLAS®, Inc. | PEI | ENVIROPLAS® |
