Order Products : sales@su-jiao.com
Thermoset Plastics DC-441
| Category: | Epoxy , Epoxy; Epoxide |
| Manufacturer: | Thermoset, Lord Chemical Products |
| Trademark: | Thermoset Plastics |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | NKDoYK_Thermoset-Plastics-DC-441.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Thermoset Plastics DC-441 is an Epoxy; Epoxide (Epoxy) material filled with aluminum. It is available in North America for casting. Primary attribute of Thermoset Plastics DC-441: Heat Resistant. |
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Features |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Apparent Density | 1.69 | g/cm³ | ASTM D1895 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore D) | 90 | ASTM D2240 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength (Yield) | 47.2 | MPa | ASTM D638 |
| Flexural Strength (Yield) | 92.4 | MPa | ASTM D790 |
| Compressive Strength | 228 | MPa | ASTM D695 |
| Thermoset | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Thermoset Components | |||
| Hardener | Mix Ratio by Volume: 1.0 Mix Ratio by Weight: 8.0 | ||
| Resin | Mix Ratio by Weight: 100 Mix Ratio by Volume: 7.5 | ||
| Thermoset Mix Viscosity (25°C) | 8000 | cP | ASTM D2393 |
| Demold Time | |||
| 25°C | 960 to 1400 | min | |
| 121°C | 120 | min |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| TEKAMID™ TA250GFR | Mando Advanced Materials Co., Ltd. | Nylon 66 | TEKAMID™ |
| Fluoroplex E 10 - GML | UNIFLON | PTFE | Fluoroplex |
| Hifax TRC 779P LD E C12886 | LyondellBasell Industries | PP, Unspecified | Hifax |
| Hostacom ERC 346N C11323 | LyondellBasell Industries | PP Copolymer | Hostacom |
| Celanex® 3200-2USFDA | Celanese Corporation | PBT | Celanex® |
