AVIMID® N

Category:	PI, TP , Thermoplastic Polyimide
Manufacturer:	Cytec Industries Inc.
Trademark:	AVIMID®
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	NI6mcp_AVIMID-N.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

Message
AVIMID® N is a high temperature, post-curable, 775°F (413°C) Tg thermoplastic polyimide composite with wet service capability up to 630°F (332°C) and dry service capability of 700°F (370°C). AVIMID N has the industry's best thermal oxidative resistance of all organic matrices and is the preferred product when high temperature durability is needed. It is a very tough composite system and has favorable dielectric properties making it well suited for missile and turbine engine applications. AVIMID N was formulated to be a non-MDA, high temperature composite that would allow the use of typical safety/health procedures and personal protection equipment (PPE). It can be compression molded into low void parts to meet demanding aerospace requirements or alternatively processed in a vacuum bag autoclave process to meet more flexible requirements usually seen in non-aerospace applications. AVIMID N is solution impregnated on a variety of fibers and fabrics that result in prepregs that retain their tack and drape for up to 6 days at 70°F (21°C). Tack can be regenerated or enhanced in a limited way by spraying the prepreg with ethanol. The prepreg has a shelf life of 12 months from date of manufacture when stored at 0°F (-18°C). Suggested Applications: Turbine engine components Missile components

Message

AVIMID® N is a high temperature, post-curable, 775°F (413°C) Tg thermoplastic polyimide composite with wet service capability up to 630°F (332°C) and dry service capability of 700°F (370°C). AVIMID N has the industry's best thermal oxidative resistance of all organic matrices and is the preferred product when high temperature durability is needed. It is a very tough composite system and has favorable dielectric properties making it well suited for missile and turbine engine applications.

AVIMID N was formulated to be a non-MDA, high temperature composite that would allow the use of typical safety/health procedures and personal protection equipment (PPE). It can be compression molded into low void parts to meet demanding aerospace requirements or alternatively processed in a vacuum bag autoclave process to meet more flexible requirements usually seen in non-aerospace applications.

AVIMID N is solution impregnated on a variety of fibers and fabrics that result in prepregs that retain their tack and drape for up to 6 days at 70°F (21°C). Tack can be regenerated or enhanced in a limited way by spraying the prepreg with ethanol. The prepreg has a shelf life of 12 months from date of manufacture when stored at 0°F (-18°C).

Suggested Applications:
Turbine engine components
Missile components

General Information
Features	Autoclavable Good Crack Resistance Good Thermal Aging Resistance Good Toughness Heat Cure High Heat Resistance Oxidation Resistant
Uses	Aerospace Applications Industrial Applications Structural Parts
Forms	Fabric Fiber
Processing Method	Compression Molding Vacuum Forming

Physical	Nominal Value	Unit
Specific Gravity	1.45	g/cm³

Mechanical	Nominal Value	Unit
Tensile Modulus ¹	4100	MPa
Tensile Strength ²	110	MPa
Tensile Elongation (Break)	6.0	%

Thermal	Nominal Value	Unit
Glass Transition Temperature ³	340 to 355	°C

Note Message
1 .	NR-150 resin
2 .	NR-150 resin
3 .	As molded plaque

Resin Grade	Manufacturer	Category	Trademark
Manner Flexible PVC X3457	Manner Plastics, L.P.	PVC, Flexible	Manner Flexible PVC
SILVER® PP 423G30	Guangdong Silver Age Sci & Tech. Co., Ltd	PP, Unspecified	SILVER®
Zythane® 7085AF	Alliance Polymers & Services	TPU-Polyether	Zythane®
Daelim Po1y® TR-570	DAELIM INDUSTRIAL CO., LTD.	HDPE, HMW	Daelim Po1y®
Durethan® BG 30 X 000000	LANXESS Corporation	Nylon 6	Durethan®