Order Products : sales@su-jiao.com
NuSil R-3975
| Category: | Silicone , Silicone |
| Manufacturer: | NuSil Technology |
| Trademark: | NuSil |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | NHoe3E_NuSil-R-3975.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
The Aircraft Industry has used silicone adhesives and coatings for over five decades. Silicone's ability to maintain its elasticity and low modulus over a broad temperature range provides excellent utility in extreme environments. Recent advances in material technology provide more opportunities for the Aircraft engineer in choosing the best material for an intended application. Examples of NuSil's capabilities in custom silicones for Aircraft are demonstrated in the following sections.
General Purpose: Ice Phobic Comment: Fuel Resistant, High Temperature |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Additional Information | Nominal Value | Unit | |
|---|---|---|---|
| Cure System | Acetoxy | ||
| Operating Temperature | -50 to 200 | °C |
| Uncured Properties | Nominal Value | Unit | |
|---|---|---|---|
| Color | Translucent | ||
| Density | 1.29 | g/cm³ | |
| Curing Time (23°C) | 72 | hr |
| Cured Properties | Nominal Value | Unit | |
|---|---|---|---|
| Shore Hardness (Shore A) | 25 | ||
| Tensile Strength | 2.93 | MPa | |
| Tensile Elongation at Break | 400 | % | |
| Tear Strength | 6.13 | kN/m |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| RTP 200 D AR 10 TFE 5 | RTP Company | Nylon 612 | RTP |
| SUMIPEX® HT03Y | Sumitomo Chemical Co., Ltd. | Acrylic (PMMA) | SUMIPEX® |
| FRblend® PP-1308 | Colour Image Plastic Compound Sdn. Bhd. (CIPC) | PP, Unspecified | FRblend® |
| HiFill® PA6/6 GF8 IM4 HS L | Techmer Engineered Solutions | Nylon 66 | HiFill® |
| SD POLYCA™ CR3420T | Sumika Styron Polycarbonate Limited | PC+PBT | SD POLYCA™ |
