Order Products : sales@su-jiao.com
Alathon® M6210
| Category: | HDPE, MMW , High Density (MMW) Polyethylene |
| Manufacturer: | LyondellBasell Industries |
| Trademark: | Alathon® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | NHc4MG_Alathon-M6210.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| ALATHON M6210 is a medium molecular weight high density homopolymer. Typical applications for this resin are blown film, coextrusion and low WVTR. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.958 | g/cm³ | ASTM D1505 |
| Melt Mass-Flow Rate (MFR) (190°C/2.16 kg) | 0.95 | g/10 min | ASTM D1238 |
| Films | Nominal Value | Unit | Test Method |
|---|---|---|---|
| secant modulus | ASTM D882 | ||
| MD | 938 | MPa | ASTM D882 |
| TD | 1270 | MPa | ASTM D882 |
| Tensile Strength | ASTM D882 | ||
| MD : Yield | 26.9 | MPa | ASTM D882 |
| TD : Yield | 27.6 | MPa | ASTM D882 |
| MD : Fracture | 54.5 | MPa | ASTM D882 |
| TD : Fracture | 23.4 | MPa | ASTM D882 |
| Tensile Elongation | ASTM D882 | ||
| MD : Fracture | 700 | % | ASTM D882 |
| TD : Fracture | 750 | % | ASTM D882 |
| Elmendorf Tear Strength | ASTM D1922 | ||
| MD | 25 | g | ASTM D1922 |
| TD | 1100 | g | ASTM D1922 |
| Extrusion | Nominal Value | Unit | |
|---|---|---|---|
| Melt Temperature | 199 - 210 | °C |
| Extrusion instructions |
|---|
| Typical Extrusion Conditions2.0 mil Blown FilmBlow Up Ratio: 2.5:1Die Gap: 60 mil |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Sinvicomp SGH9505 | Teknor Apex Asia Pacific PTE. LTD. | PVC, Flexible | Sinvicomp |
| Sumikon® EME-7351LS | Sumitomo Bakelite Co., Ltd. | Epoxy | Sumikon® |
| Sylvin 86016-95 Clear | Sylvin Technologies Incorporated | PVC, Unspecified | Sylvin |
| Bayfill® EA 6005 | Covestro - PUR | PUR-Ether/MDI | Bayfill® |
| Lifolit® E 60.1451/1 Glow i. t. Dark 6024 | Müller Kunststoffe GmbH | PVC, Flexible | Lifolit® |
