Order Products : sales@su-jiao.com

INEOS LDPE 23L430B

Category:	LDPE , Low Density Polyethylene
Manufacturer:	INEOS Olefins & Polymers Europe
Trademark:	INEOS LDPE
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	NFCfuA_INEOS-LDPE-23L430B.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

Message
Benefits & Features 23L430B special polymer structure gives the following properties: Excellent draw down ability with adequate neck-in and stable edges Good process ability also at high line speeds and/or low coating weights Low fumes during extrusion Good adhesion on many substrates Good heat sealing properties Good organoleptical properties Low permeability to moisture and gases Good scratch resistance High purity and very low gel level Applications 23L430B is a low density polyethylene homopolymer for general coating applications. 23L430B coated substrates such as paper, board and aluminium can be used for packaging food and liquids, powders, medical devices, agricultural materials, chemicals and many other products.

Message

Benefits & Features
23L430B special polymer structure gives the following properties:

Excellent draw down ability with adequate neck-in and stable edges

Good process ability also at high line speeds and/or low coating weights

Low fumes during extrusion

Good adhesion on many substrates

Good heat sealing properties

Good organoleptical properties

Low permeability to moisture and gases

Good scratch resistance

High purity and very low gel level

Applications
23L430B is a low density polyethylene homopolymer for general coating applications.
23L430B coated substrates such as paper, board and aluminium can be used for packaging food and liquids, powders, medical devices, agricultural materials, chemicals and many other products.

General Information
Features	Additive Free Good Adhesion Good Drawdown Good Heat Seal Good Organoleptic Properties Good Processability High Purity Homopolymer Low Density Low Gas Permeability Low Gel Low Moisture Vapor Transmission Low to No Fumes Scratch Resistant
Uses	Agricultural Applications Coating Applications Foil Coatings Food Packaging Medical Packaging Packaging Paper Coatings
RoHS Compliance	Contact Manufacturer
Forms	Pellets
Processing Method	Extrusion Coating Injection Molding

Physical	Nominal Value	Unit	Test Method
Density (23°C)	0.923	g/cm³	ISO 1183
Melt Mass-Flow Rate (MFR) (190°C/2.16 kg)	4.5	g/10 min	ISO 1133

Thermal	Nominal Value	Unit	Test Method
Vicat Softening Temperature	98.0	°C	ISO 306/A50
Melting Temperature (DSC) ¹	113	°C	Internal Method

Extrusion	Nominal Value	Unit
Melt Temperature	280 to 325	°C

Note Message
1 .	10°C/min

Resin Grade	Manufacturer	Category	Trademark
Shin-Etsu Elastomer KEG-2000-50A/B	Shin-Etsu Silicones of America	Silicone Rubber, HTV	Shin-Etsu Elastomer
Tecotek® PC40 NL VB02	Eurotec Engineering Plastics	PC+PBT	Tecotek®
Fainplast PVC RI 059/1	Fainplast Compounds S.r.l	PVC, Rigid	Fainplast PVC
ELASTICHEM™ 4011TX-02	Colorite Polymers	PVC, Flexible	ELASTICHEM™
Pujie CPE-3611	Zhanhua Pujie Chemical Technology Co.,Ltd	CPE	Pujie