Order Products : sales@su-jiao.com
Petrothene® GA594000
| Category: | LLDPE , Linear Low Density Polyethylene |
| Manufacturer: | LyondellBasell Industries |
| Trademark: | Petrothene® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | NEEgK8_Petrothene-GA594000.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| PETROTHENE GA 594-000 is a pelletized LLDPE copolymer resin for injection molding lids and thin-walled items requiring high flow and short cycle times. GA 594-000 exhibits excellent flow, warp resistance and surface appearance. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.933 | g/cm³ | ASTM D1505 |
| Melt Mass-Flow Rate (MFR) (190°C/2.16 kg) | 140 | g/10 min | ASTM D1238 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore D) | 61 | ASTM D2240 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength 1 | ASTM D638 | ||
| Yield | 17.3 | MPa | ASTM D638 |
| Fracture | 17.3 | MPa | ASTM D638 |
| Tensile Elongation 2(Yield) | 9.8 | % | ASTM D638 |
| Flexural Modulus 3 | ASTM D790 | ||
| 1% secant | 669 | MPa | ASTM D790 |
| 2% secant | 572 | MPa | ASTM D790 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load (0.45 MPa, Unannealed) | 52.0 | °C | ASTM D648 |
| Brittleness Temperature | -27.0 | °C | ASTM D746 |
| Vicat Softening Temperature | 91.0 | °C | ASTM D1525 |
| Additional Information |
|---|
| Spiral Flow, Equistar Test Method, 0.625 in insert, 1000 psi injection pressure, 440°F melt temperature: 26.7 in |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Rear Temperature | 177 | °C | |
| Middle Temperature | 191 | °C | |
| Front Temperature | 204 | °C | |
| Nozzle Temperature | 204 | °C |
| Note Message | |
|---|---|
| 1 . | 51 mm/min |
| 2 . | 51 mm/min |
| 3 . | 13 mm/min |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| SCHULAMID® 66 GF 30 H | A. Schulman Europe | Nylon 66 | SCHULAMID® |
| Aplax P0060GN | Ginar Technology Co., LTD. | PP, Unspecified | Aplax |
| EPO-TEK® B9021-15 | Epoxy Technology Inc. | Epoxy | EPO-TEK® |
| Sylvin 2985-78 Clear Green 3202 | Sylvin Technologies Incorporated | PVC, Unspecified | Sylvin |
| Wuxi Jiahong EB-207X | Wuxi Jiahong Plastics Technology CO., Ltd. | PVC, Unspecified | Wuxi Jiahong |
