Order Products : sales@su-jiao.com
UMERIT® 1520F
| Category: | LLDPE , Linear Low Density Polyethylene |
| Manufacturer: | UBE America, Inc. |
| Trademark: | UMERIT® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | NDnZq2_UMERIT-1520F.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
UBE super polyethylene are ethylene alpha-olefin copolymers produced using metallocene catalyst by gas phase process. Metallocene catalyst can produce aimed molecular structures. Therefore UMERIT®1520F offer various excellent properties. -Excellent impact strength. -Lower heat seal temperature |
| General Information | |
|---|---|
| Features |
|
| Forms |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.913 | g/cm³ | ASTM D1505 |
| Melt Mass-Flow Rate (MFR) | 2.0 | g/10 min | ASTM D1238 |
| Environmental Stress-Cracking Resistance (F50) | 1000 | hr | ASTM D1693 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore D) | 51 | ASTM D2240 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength | 40.0 | MPa | ASTM D638 |
| Tensile Elongation (Break) | 700 | % | ASTM D638 |
| Flexural Modulus | 190 | MPa | ASTM D790 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Vicat Softening Temperature | 98.0 | °C | ASTM D1525 |
| Melting Temperature | 114 | °C |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| UNIBRITE® UA-1400 | Nippon A&L Inc. | ASA | UNIBRITE® |
| Celstran® +PP-GF40-04CN03 | Celanese Corporation | PP, Unspecified | Celstran® |
| HiFill® PEI GF30 | Techmer Engineered Solutions | PEI | HiFill® |
| HiFill® HDPE GF30 | Techmer Engineered Solutions | HDPE | HiFill® |
| Sylvin 8980-70 Natural | Sylvin Technologies Incorporated | PVC, Unspecified | Sylvin |
