Order Products : sales@su-jiao.com
ELITE™ 5538G
| Category: | EPE , Enhanced Polyethylene Resin |
| Manufacturer: | The Dow Chemical Company |
| Trademark: | ELITE™ |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | NCboOF_ELITE-5538G.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
| General Information | |
|---|---|
| Agency Ratings |
|
| Forms |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 0.941 | g/cm³ | ASTM D792 |
| Melt Mass-Flow Rate (MFR) (190°C/2.16 kg) | 1.3 | g/10 min | ASTM D1238 |
| Films | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Film Thickness - Tested | 51 | µm | |
| Film Puncture Force (51 µm) | 46.0 | N | Internal method |
| Tensile Strength | ASTM D882 | ||
| MD : Fracture, 51 µm | 44.0 | MPa | ASTM D882 |
| TD : Fracture, 51 µm | 39.0 | MPa | ASTM D882 |
| Tensile Elongation | ASTM D882 | ||
| MD : Fracture, 51 µm | 1000 | % | ASTM D882 |
| TD : Fracture, 51 µm | 1100 | % | ASTM D882 |
| Dart Drop Impact (51 µm) | 99 | g | ASTM D1709A |
| Elmendorf Tear Strength | ASTM D1922 | ||
| MD : 51 µm | 82 | g | ASTM D1922 |
| TD : 51 µm | 650 | g | ASTM D1922 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Melting Temperature (DSC) | 129 | °C | Internal method |
| Extrusion | Nominal Value | Unit | |
|---|---|---|---|
| Melt Temperature | 230 | °C |
| Extrusion instructions |
|---|
| 吹塑薄膜的制造条件： 螺杆尺寸：60/70 mm；30:1 L/D 螺杆类型：阻隔螺杆 模具间隙：2.3 mm 熔体温度：230°C 输出：150 Kg/h 模具直径：150 mm。 放大比：2.5:1 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| RTP 4087 UP | RTP Company | PPA | RTP |
| VESTAMID® HTplus M3035 | Evonik Industries AG | PPA | VESTAMID® HTplus |
| Zytel® FG42L NC010 | DuPont Performance Polymers | Nylon 66 | Zytel® |
| Latiohm 87/28-05 PD01 G/10 | LATI S.p.A. | PC | Latiohm |
| PEARLSTICK® 45-40/08 | Lubrizol Advanced Materials, Inc. | TPU-Capro | PEARLSTICK® |
