Order Products : sales@su-jiao.com
KW Plastics KW 627C
| Category: | PP Impact Copolymer , Polypropylene Impact Copolymer |
| Manufacturer: | KW Plastics |
| Trademark: | KW Plastics |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | NBT6MN_KW-Plastics-KW-627C.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Copolymer Impact Polypropylene Post-Consumer Resin Compounded with 7% Calcium Carbonate CHARACTERISTICS Good impact strength and improved HDT. |
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Recycled Content |
|
| Features |
|
| RoHS Compliance |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 0.963 | g/cm³ | ASTM D792 |
| Melt Mass-Flow Rate (MFR) | 10 | g/10 min | ASTM D1238 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength (Yield) | 20.7 | MPa | ASTM D638 |
| Tensile Elongation (Break) | 13 | % | ASTM D638 |
| Flexural Modulus | 945 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact | 100 | J/m | ASTM D256 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load | ASTM D648 | ||
| 0.45 MPa, Unannealed | 85.0 | °C | |
| 1.8 MPa, Unannealed | 57.0 | °C |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Polytron® P60B08-S | Polyram Ram-On Industries | PP Homopolymer | Polytron® |
| Ultramid® A3WG5 | BASF Corporation | Nylon 66 | Ultramid® |
| LEXAN鈩?EXL1810T resin | SABIC Innovative Plastics | PC | LEXAN™ |
| LUVOCOM® 1105-7096 | Lehmann & Voss & Co. | PEEK | LUVOCOM® |
| POLYfill PPH K8030 | Polykemi AB | PP Homopolymer | POLYfill |
