| Category: | HDPE , High Density Polyethylene |
| Manufacturer: | Braskem IDESA |
| Trademark: | Braskem PE |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | N72H3e_BraskemPEHDB0358.pdf |
| PRICE: | Order Products email sales@su-jiao.com |
| Message |
|---|
|
HDB0358 is a bimodal high-density polyethylene copolymer grade. It has an outstanding stiffness and environmental stress crack resistance (ESCR) balance making it ideal for use in a wide range of blow moulding applications. This grade is particularly well suited to chemical and detergent packaging as the exceptional ESCR can allow for significant bottle weight reduction. Application: Blow molded containers up to 25 liters capacity for packaging chemicals, many household products, oils and foodstuffs. Sheet and Corrugated Pipe Extrusion. Process: Blow Molding and Extrusion. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.958 | g/cm³ | ISO 1183 |
| Melt Mass-Flow Rate (MFR) (190°C/2.16 kg) | 0.30 | g/10 min | ISO 1133 |
| Environmental Stress-Cracking Resistance (50°C, 100% Adinol) | > 200 | hr | ASTM D1693 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress (Yield) | 28.0 | MPa | ISO 527-2 |
| Tensile Strain (Break) | > 300 | % | ISO 527-2 |
| Flexural Modulus | 1200 | MPa | ISO 178 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Charpy Unnotched Impact Strength | 12 | kJ/m² | ISO 179 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| RTP 2502 | RTP Company | PC+ABS | RTP |
| Amodel® A-4133 HH | Solvay Specialty Polymers | PPA | Amodel® |
| DENIFORM 2010 | Vamp Tech | Acetal (POM) Copolymer | DENIFORM |
| Ferro PP TPP34AN54NA | Ferro Corporation | PP, Unspecified | Ferro PP |
| LUVOCOM® 1-8385 | Lehmann & Voss & Co. | Nylon 66 | LUVOCOM® |