Order Products : sales@su-jiao.com
INEOS HDPE K44-24-122
| Category: | HDPE Copolymer , High Density Polyethylene Copolymer |
| Manufacturer: | INEOS Olefins & Polymers USA |
| Trademark: | INEOS HDPE |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | N5BGeA_INEOS-HDPE-K44-24-122.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| K44-24-122 is a natural high density polyethylene copolymer designed specifically for pipe coating and extrusion. It complies with the virgin polyethylene resin requirements in CSA Z245-21, and is also listed with the Plastics Pipe Institute as a PE 3408. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| RoHS Compliance |
|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.944 | g/cm³ | ASTM D4883 |
| Melt Mass-Flow Rate (MFR) | ASTM D1238 | ||
| 190°C/2.16 kg | 0.37 | g/10 min | |
| 190°C/21.6 kg | 30 | g/10 min | |
| Environmental Stress-Cracking Resistance (100% Igepal, F50) | > 1000 | hr | ASTM D1693B |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore D) | 65 | ASTM D2240 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength 1 | ASTM D638 | ||
| Yield | 20.7 | MPa | |
| Break | 31.0 | MPa | |
| Tensile Elongation 2 | ASTM D638 | ||
| Yield | 11 | % | |
| Break | > 700 | % | |
| Flexural Modulus - 2% Secant | 793 | MPa | ASTM D790A |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact | 530 | J/m | ASTM D256 |
| Notched Izod Impact (Area) | 52.6 | kJ/m² | ASTM D256 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Brittleness Temperature | < -118 | °C | ASTM D746 |
| Vicat Softening Temperature | 128 | °C | ASTM D1525 |
| Oxidation Induction Time (220°C) | > 10 | min | ASTM D3895 |
| Thermal Stability | > 260 | °C | ASTM D3350 |
| Additional Information | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Cell Classification | 335440A | ASTM D3350 | |
| PENT - Notch Tensile | > 10 | hr | ASTM F1473 |
| Note Message | |
|---|---|
| 1 . | 51 mm/min |
| 2 . | 51 mm/min |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Ad-Tech Epoxy CTC-110 | Ad-Tech Plastic Systems Corp. | Epoxy | Ad-Tech Epoxy |
| EPO-TEK® OG142-112 | Epoxy Technology Inc. | Epoxy | EPO-TEK® |
| PLUSTEK PA310G8BK10 | Polyram Ram-On Industries | Nylon 66 | PLUSTEK |
| Sylvin 7833-85 Yellow 4203 | Sylvin Technologies Incorporated | PVC, Unspecified | Sylvin |
| Sarlink® TPE FM-2270 XRD1 (PRELIMINARY DATA) | Teknor Apex Company | TPE | Sarlink® TPE |
