Order Products : sales@su-jiao.com
RTP 609
| Category: | ABS , Acrylonitrile Butadiene Styrene |
| Manufacturer: | RTP Company |
| Trademark: | RTP |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | N3dSrY_RTP-609.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Warning: The status of this material is 'Commercial: Limited Issue' The data for this material has not been recently verified. Please contact RTP Company for current information prior to specifying this grade. |
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| RoHS Compliance |
|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.46 | g/cm³ | ASTM D792 |
| Molding Shrinkage - Flow (3.18 mm, Injection Molded) | 0.10 | % | ASTM D955 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Modulus (Injection Molded) | 13100 | MPa | ASTM D638 |
| Tensile Strength | 96.0 | MPa | ASTM D638 |
| Tensile Elongation (Yield, Injection Molded) | 1.0 | % | ASTM D638 |
| Flexural Modulus (Injection Molded) | 12400 | MPa | ASTM D790 |
| Flexural Strength (Injection Molded) | 145 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact (3.18 mm, Injection Molded) | 53 | J/m | ASTM D256 |
| Unnotched Izod Impact (3.18 mm) | 210 | J/m | ASTM D4812 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load | ASTM D648 | ||
| 0.45 MPa, unannealed, injection molded | 121 | °C | ASTM D648 |
| 1.8 MPa, unannealed, injection molded | 116 | °C | ASTM D648 |
| Flammability | Nominal Value | Test Method | |
|---|---|---|---|
| Flame Rating (1.50 mm) | HB | UL 94 |
| Additional Information |
|---|
| The value listed as Flammibility, UL 94, was tested in accordance with RTP Company methods. |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Rear Temperature | 199 - 232 | °C | |
| Middle Temperature | 199 - 232 | °C | |
| Front Temperature | 199 - 232 | °C | |
| Mold Temperature | 63.0 - 85.0 | °C | |
| Injection Pressure | 69.0 - 103 | MPa |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| RTP 4300 B-430 | RTP Company | PSU | RTP |
| Telcar® TL-91-T3056D-75 | Teknor Apex Company | TPE | Telcar® |
| Niuk 20NT04 | Shanghai Niuk New Plastic Technology Co., Ltd. | ABS | Niuk |
| Cheng Yu PP226 | Cheng Yu Plastic Company Limited | PP, Unspecified | Cheng Yu |
| Vipel® F737-FBG-36 | AOC, L.L.C. | Polyester Alloy | Vipel® |
