Order Products : sales@su-jiao.com

Biograde D-F

Category:	Biodeg Polymers , Biodegradable Polymers
Manufacturer:	Biograde Group of Companies
Trademark:	Biograde
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	N0DML8_Biograde-D-F.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

Message
A Hybrid resin for film applications where Biodegradability is not required. For use where use of renewable resources is desired. Used for thin and thick gauge film applications. BIOGRADE D-F is a based on a blend of thermoplastic starch (TPS) with Polyethylene. This grade of resin is compatibilised to offer a high level of mechanical strength, outstanding elongation properties and toughness. The resin is based on corn starch which is a renewable material. Applications Shopping bags/Check-out bags Garbage bags Leaf litter bags Bin liners Overwrap Packaging

Message

A Hybrid resin for film applications where Biodegradability is not required.

For use where use of renewable resources is desired.

Used for thin and thick gauge film applications.

BIOGRADE D-F is a based on a blend of thermoplastic starch (TPS) with Polyethylene. This grade of resin is compatibilised to offer a high level of mechanical strength, outstanding elongation properties and toughness. The resin is based on corn starch which is a renewable material.

Applications

Shopping bags/Check-out bags

Garbage bags

Leaf litter bags

Bin liners

Overwrap Packaging

General Information
Features	Biodegradable Good Toughness High Elongation High Strength Renewable Resource Content
Uses	Bags Blow Molding Applications Film Liners Packaging
Forms	Pellets
Processing Method	Blown Film

Physical	Nominal Value	Unit	Test Method
Density	1.07	g/cm³	ASTM D4883
Melt Mass-Flow Rate (MFR) (150°C/2.16 kg)	0.96	g/10 min	ASTM D1238

Mechanical	Nominal Value	Unit	Test Method
Tensile Strength			ASTM D883
Yield	> 10.0	MPa
Break	> 10.0	MPa
Tensile Elongation (Break)	> 300	%	ASTM D883

Thermal	Nominal Value	Unit	Test Method
Peak Melting Temperature	90.0 to 130	°C	ASTM D3418

Additional Information	Nominal Value	Unit
Blown Film Melt Temperature	100 to 160	°C

Resin Grade	Manufacturer	Category	Trademark
Smoothblend® PC-1200	Colour Image Plastic Compound Sdn. Bhd. (CIPC)	PC	Smoothblend®
TAROLOX 10 Z3	Taro Plast S.p.A.	PBT	TAROLOX
Clariant Nylon 6/6 PA-121G13	Clariant Corporation	Nylon 66	Clariant Nylon 6/6
Kingfa JH720 G10	Kingfa	PC Alloy	Kingfa
Maxxam™ FR WC 0587-21 R3 RoHS	PolyOne Corporation	PP, Unspecified	Maxxam™ FR