Order Products : sales@su-jiao.com

DOW™ LLDPE DNDA-1055 NT 7

Category:	LLDPE , Linear Low Density Polyethylene Resin
Manufacturer:	The Dow Chemical Company
Trademark:	陶氏线性低密度聚乙烯
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	N0BBIm_DOWLLDPEDNDA1055NT7.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

Message
DOW DNDA-1055 NT 7 Linear Low Density Polyethylene (LLDPE) Resin is produced using UNIPOL™ PE Process Technology and is intended for high-speed injection molding of thin-walled parts such as lids. This resin has been designed to have an excellent balance of processability and impact strength. Main Characteristics: Excellent processability Good low temperature impact strength Balanced density and melt index Complies with: U.S. FDA 21 CFR 177/1520(c)3.1a Consult the regulations for complete details.

Message

DOW DNDA-1055 NT 7 Linear Low Density Polyethylene (LLDPE) Resin is produced using UNIPOL™ PE Process Technology and is intended for high-speed injection molding of thin-walled parts such as lids. This resin has been designed to have an excellent balance of processability and impact strength.

Main Characteristics:

Excellent processability

Good low temperature impact strength

Balanced density and melt index

Complies with:

U.S. FDA 21 CFR 177/1520(c)3.1a

Consult the regulations for complete details.

General Information
Agency Ratings	FDA 21 CFR 177.1520(c) 3.1a
Forms	Particle
Processing Method	Injection molding

Physical	Nominal Value	Unit	Test Method
Specific Gravity	0.928	g/cm³	ASTM D792
Melt Mass-Flow Rate (MFR) (190°C/2.16 kg)	85	g/10 min	ASTM D1238
Environmental Stress-Cracking Resistance (50°C, 100% Igepal, F50)	3.00	hr	ASTM D1693

Mechanical	Nominal Value	Unit	Test Method
Tensile Strength (Yield)	10.3	MPa	ASTM D638
Tensile Elongation (Yield)	2.5	%	ASTM D638
Flexural Modulus - 2% Secant	469	MPa	ASTM D790B

Thermal	Nominal Value	Unit	Test Method
Deflection Temperature Under Load (0.45 MPa, Unannealed)	46.1	°C	ASTM D648

Additional Information
Plaque molded and tested in accordance with ASTM D4976.

Resin Grade	Manufacturer	Category	Trademark
Quadrant EPP ERTACETAL® H-TF	Quadrant Engineering Plastic Products	Acetal (POM) Homopolymer	Quadrant EPP
UNIVAL™ DMDA-6400 NT 7	The Dow Chemical Company	HDPE	UNIVAL™
HiFill® PA6/6 GF33 HS L	Techmer Engineered Solutions	Nylon 66	HiFill®
KumhoSunny PC/PBT HCB9230	Shanghai KumhoSunny Plastics Co., Ltd.	PC+PBT	KumhoSunny PC/PBT
POLYfill PP CIP6015F VTUV	Polykemi AB	PP, Unspecified	POLYfill