RTP ESD C 2180

Category: PEI , Polyether Imide
Manufacturer: RTP Company
Trademark: RTP
Fillers: -
Ports: Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms FOB, CIF, DAP, DAT, DDP
PDF: N06WTL_RTP-ESD-C-2180.pdf
PRICE: ​Order Products​ email   sales@su-jiao.com
Wechat: WECHAT
Message
Carbon Fiber - ESD Protection - Electrically Conductive
General Information
Filler / Reinforcement
  • Carbon fiber reinforced material
Features
  • Conductivity
  • Electrostatic discharge protection
RoHS Compliance
  • Contact manufacturer
Processing Method
  • Injection molding
PhysicalNominal ValueUnitTest Method
Specific Gravity 1.32g/cm³ASTM D792
Molding Shrinkage - Flow (3.20 mm)0.10 - 0.20%ASTM D955
Moisture Content 0.040%
ElectricalNominal ValueUnitTest Method
Static Decay 1secFTMS 101C 4046.1
MechanicalNominal ValueUnitTest Method
Tensile Modulus 8960MPaASTM D638
Tensile Strength 159MPaASTM D638
Tensile Elongation (Yield)2.0 - 4.0%ASTM D638
Flexural Modulus 7580MPaASTM D790
Flexural Strength 221MPaASTM D790
ImpactNominal ValueUnitTest Method
Notched Izod Impact (3.20 mm)53J/mASTM D256
Unnotched Izod Impact (3.20 mm)430J/mASTM D4812
ElectricalNominal ValueUnitTest Method
Surface Resistivity
    -- < 1.0E+6ohmsASTM D257
    -- < 1.0E+5ohmsESD STM11.11
Volume Resistivity < 1.0E+3ohms·cmASTM D257
InjectionNominal ValueUnit
Drying Temperature 149°C
Drying Time 4.0hr
Dew Point -28.9°C
Processing (Melt) Temp 354 - 399°C
Mold Temperature 135 - 177°C
Injection Pressure 82.7 - 124MPa
Injection instructions
Desiccant Type Dryer Required.
Note Message
1 .MIL-PRF-81705D, 5kV to 50 V, 12% RH
Resin Grade Manufacturer Category Trademark
RTP 127 UV RTP Company PP Homopolymer RTP
Staramide RFM3353EM Eurostar Engineering Plastics Nylon 66/6 Staramide
Flontech® FT-BRR60-1 Guarniflon S.p.A. - Flontech Division PTFE Flontech®
INEOS PP 240-HP80 INEOS Olefins & Polymers Europe PP Random Copolymer INEOS PP
S.O.E.™ S1606 AKelastomers SBC S.O.E.™