Tecnoflon® T 538

Category:	Fluorelastomer , Fluoroelastomer
Manufacturer:	Solvay Specialty Polymers
Trademark:	Tecnoflon®
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	MwRpPO_Tecnoflon-T-538.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

Message
TECNOFLON® T 538 is a low viscosity fluoroelastomer terpolymer with 68.5% fluorine content. Tecnoflon® T 538 has been designed and synthesized with a new patented polymerization technology that assures improved processability and outstanding physical properties. Tecnoflon® T 538 does not contain curatives: therefore the proper levels of Tecnoflon® FOR M1 and Tecnoflon® FOR M2 must be added to achieve the required properties. Tecnoflon® T 538 exhibits the chemical resistance typical of fluoroelastomer terpolymers. It is well suited for applications requiring better chemical resistance and/or long term heat resistance compared to fluoroelastomer copolymers. Some of the basic properties of Tecnoflon® T 538 are: Excellent chemical resistance Good heat resistance Excellent processability Tecnoflon® T 538 can be used for compression, injection and transfer molding of shaft seals, valve stem seals, gaskets or any item requiring excellent chemical resistance This material can be combined with the cure system and other typical fluoroelastomer compounding ingredients. Mixing can be accomplished with two-roll mills or internal mixers. Tecnoflon® T 538 can be extruded into hoses or profiles and can be calendered to make sheet stocks or belting. Finished goods can be produced by a variety of rubber processing methods.

Message

TECNOFLON® T 538 is a low viscosity fluoroelastomer terpolymer with 68.5% fluorine content. Tecnoflon® T 538 has been designed and synthesized with a new patented polymerization technology that assures improved processability and outstanding physical properties. Tecnoflon® T 538 does not contain curatives: therefore the proper levels of Tecnoflon® FOR M1 and Tecnoflon® FOR M2 must be added to achieve the required properties.
Tecnoflon® T 538 exhibits the chemical resistance typical of fluoroelastomer terpolymers. It is well suited for applications requiring better chemical resistance and/or long term heat resistance compared to fluoroelastomer copolymers.

Some of the basic properties of Tecnoflon® T 538 are:

Excellent chemical resistance

Good heat resistance

Excellent processability

Tecnoflon® T 538 can be used for compression, injection and transfer molding of shaft seals, valve stem seals, gaskets or any item requiring excellent chemical resistance
This material can be combined with the cure system and other typical fluoroelastomer compounding ingredients. Mixing can be accomplished with two-roll mills or internal mixers. Tecnoflon® T 538 can be extruded into hoses or profiles and can be calendered to make sheet stocks or belting.
Finished goods can be produced by a variety of rubber processing methods.

General Information
Features	Good Chemical Resistance Good Heat Aging Resistance Good Processability High Heat Resistance Low Viscosity Terpolymer
Uses	Belts/Belt Repair Blending Gaskets Hose Profiles Seals Sheet Valves/Valve Parts
Appearance	Translucent
Forms	Slab
Processing Method	Calendering Compounding Compression Molding Extrusion Injection Molding Resin Transfer Molding

Physical	Nominal Value	Unit
Mooney Viscosity ¹(ML 1+10, 121°C)	26	MU
Fluorine Content ²	69	%

Note Message
1 .	Raw polymer
2 .	Raw polymer

Resin Grade	Manufacturer	Category	Trademark
MEGOLON™ S530	AlphaGary	TP, Unspecified	MEGOLON™
Sasol Polymers PE HR477	Sasol Polymers	LLDPE	Sasol Polymers PE
NOVALAC RX®611V	Vyncolit N.V.	Phenolic	NOVALAC
ARCEL® 730B (2.00 pcf)	NOVA Chemicals	PS+PE	ARCEL®
Arnite® TV4 290	DSM Engineering Plastics	PBT	Arnite®