Order Products : sales@su-jiao.com
Advanced Composites ATX639MX2N
| Category: | PP, Unspecified , Polypropylene |
| Manufacturer: | Advanced Composites, Inc. |
| Trademark: | Advanced Composites |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | MwEG3D_Advanced-Composites-ATX639MX2N.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Advanced Composites ATX639MX2N is a polypropylene product,. It is available in North America. Typical application areas are: automotive industry. Features include:
|
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Forms |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 1.06 | g/cm³ | ISO 1183 |
| Melt Mass-Flow Rate (MFR) | 7.0 | g/10 min | ISO 1133 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore D) | 63 | ISO 868 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress (Yield) | 23.0 | MPa | ISO 527-2 |
| Flexural Modulus | 1690 | MPa | ISO 178 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact | ISO 180/A | ||
| -40°C | 7.7 | kJ/m² | ISO 180/A |
| 23°C | 30 | kJ/m² | ISO 180/A |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Heat Deflection Temperature | |||
| 0.45 MPa, not annealed | 106 | °C | ISO 75-2/B |
| 1.8 MPa, not annealed | 53.4 | °C | ISO 75-2/A |
| Additional Information |
|---|
| Instrumented Impact, ASTM D3763, 6.7 m/s, 0°C: 27/30 # Ductile |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 100 | °C | |
| Drying Time | 2.0 - 4.0 | hr | |
| Rear Temperature | 193 | °C | |
| Middle Temperature | 210 - 216 | °C | |
| Front Temperature | 216 | °C | |
| Nozzle Temperature | 210 | °C | |
| Processing (Melt) Temp | 199 - 249 | °C | |
| Mold Temperature | 48.9 - 60.0 | °C | |
| Injection Rate | Slow-Moderate | ||
| Cushion | 6.35 - 12.7 | mm |
| Injection instructions |
|---|
| Injection Pressure: 50 to 60% of machine capacityScrew RPM: 1 to 2 secs before mold open |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| RTP 205 A HI | RTP Company | Nylon 6 | RTP |
| Resiprene® 1055 | Resirene, S.A. de C.V. | TPE | Resiprene® |
| Nypol® PA A3 HL CNZ0263 NR387 | Petropol Industry and Trade of Polymers LTDA | Nylon 66 | Nypol® PA |
| Hy-Vin® XA80207 | INEOS Compounds | PVC, Flexible | Hy-Vin® |
| LEXAN™ 124R resin | SABIC Innovative Plastics | PC | LEXAN™ |
