Category: | PBT , Polybutylene Terephthalate |
Manufacturer: | Polyplastics Co., Ltd. |
Trademark: | DURANEX® |
Fillers: | - |
Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
Delivery Terms | FOB, CIF, DAP, DAT, DDP |
PDF: | MmPsL9_DURANEX-531HS.pdf ![]() |
PRICE: | Order Products email sales@su-jiao.com |
Message |
---|
Hydrolysis Resistant, Heat Shock Resistant, GF30% reinforced |
General Information | |
---|---|
Filler / Reinforcement |
|
Features |
|
UL File Number |
|
Forms |
|
Processing Method |
|
Part Marking Code (ISO 11469) |
|
Physical | Nominal Value | Unit | Test Method |
---|---|---|---|
Density | 1.47 | g/cm³ | ISO 1183 |
Water Absorption (23°C, 24 hr) | 0.20 | % | ISO 62 |
Mechanical | Nominal Value | Unit | Test Method |
---|---|---|---|
Tensile Stress | 118 | MPa | ISO 527-2 |
Tensile Strain (Break) | 2.7 | % | ISO 527-2 |
Flexural Modulus | 8100 | MPa | ISO 178 |
Flexural Stress | 187 | MPa | ISO 178 |
Impact | Nominal Value | Unit | Test Method |
---|---|---|---|
Charpy Notched Impact Strength | 11 | kJ/m² | ISO 179/1eA |
Thermal | Nominal Value | Unit | Test Method |
---|---|---|---|
Heat Deflection Temperature (1.8 MPa, Unannealed) | 208 | °C | ISO 75-2/A |
Linear thermal expansion coefficient | Internal method | ||
Flow : 23 to 55°C | 2.0E-5 | cm/cm/°C | Internal method |
Lateral : 23 to 55°C | 9.0E-5 | cm/cm/°C | Internal method |
Electrical | Nominal Value | Unit | Test Method |
---|---|---|---|
Volume Resistivity | 1.0E+16 | ohms·cm | IEC 60093 |
Dielectric Strength (3.00 mm) | 16 | kV/mm | IEC 60243-1 |
Flammability | Nominal Value | Unit | Test Method |
---|---|---|---|
Flame Rating | HB | UL 94 |
Additional Information | Nominal Value | ||
---|---|---|---|
Color Number | EF2001/ED3002 |
Injection | Nominal Value | Unit | |
---|---|---|---|
Drying Temperature | 120 - 140 | °C | |
Drying Time | 3.0 - 5.0 | hr | |
Processing (Melt) Temp | 250 - 270 | °C | |
Mold Temperature | 40.0 - 80.0 | °C | |
Holding Pressure | 60.0 - 100 | MPa | |
Screw Speed | 100 - 150 | rpm |
Injection instructions |
---|
Cooling Time: Plasticization time + alpha or time without sticking in mold |
Resin Grade | Manufacturer | Category | Trademark |
---|---|---|---|
RTP 2700-43A | RTP Company | TPE | RTP |
SILVER® SA-1101 | Guangdong Silver Age Sci & Tech. Co., Ltd | SBS | SILVER® |
Sylvin 5150-80 NATURAL | Sylvin Technologies Incorporated | PVC, Unspecified | Sylvin |
Daelim Po1y® LH-150H | DAELIM INDUSTRIAL CO., LTD. | HDPE | Daelim Po1y® |
Gravi-Tech™ GRV-UR-110-W | PolyOne Corporation | PUR, Unspecified | Gravi-Tech™ |