Order Products : sales@su-jiao.com
T & T Marketing TPE 5345
| Category: | TPV , Thermoplastic Vulcanizate |
| Manufacturer: | T & T Marketing, Inc. |
| Trademark: | T & T Marketing |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | MlYgw2_T-T-Marketing-TPE-5345.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
TPE 5345 is a flexible natural, olefin-based thermoplastic vulcanizate (TPV) intended for wire and cable insulation and jacketing applications where high temperature performance and excellent flame resistance are required. TPE 5345 complies with "Restriction of Hazardous Substances" Directive, Citation 2002-95-EC, commonly known as RoHS without exemption. TPE 5345 exhibits excellent wet and dry electrical properties and superior chemical resistance. It also provides good resistance to abrasion, impact and crush. TPE 5345 also exhibits superior low temperature properties as demonstrated by it passing cold bend and impact testing at -40°C. TPE 5345 contains a halogen-based, flame retardant additive package designed to reduce normal PE flame spread characteristics. It also offers good extrusion processing characteristics on either conventional polyethylene or PVC extrusion lines. TPE 5345 is readily pigmented to a variety of colors using standard wire and cable color concentrates designed for thermoplastic or crosslinked polyolefins. UV light standards can be met with the addition of carbon black UV masterbatch. |
| General Information | |
|---|---|
| Additive |
|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| RoHS Compliance |
|
| Appearance |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.17 | g/cm³ | ASTM D792 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore A, 0.762 mm) | 92 | ASTM D2240 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Flexural Modulus (0.762 mm) | 290 | MPa | ASTM D790 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength (0.762 mm) | 16.5 | MPa | ASTM D412 |
| Tensile Elongation (Break, 0.762 mm) | 600 | % | ASTM D412 |
| Aging | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Retention of Tensile Elongation - 7 days at 136°C (762.0 µm) | 75 | % | UL 1581 |
| Retention of Tensile Strength - 7 days at 136°C (762.0 µm) | 90 | % | UL 1581 |
| Extrusion | Nominal Value | Unit | |
|---|---|---|---|
| Extruder Screw Compression Ratio | 3:1 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Brittleness Temperature | -40.0 | °C | ASTM D746 |
| Electrical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Volume Resistivity (1.91 mm) | 1.6E+16 | ohms·cm | ASTM D257 |
| Dielectric Strength (1.91 mm) | 26 | kV/mm | ASTM D149 |
| Dielectric Constant (1.91 mm, 60 Hz) | 2.40 | ASTM D150 | |
| Dissipation Factor (1.91 mm, 60 Hz) | 2.7E-3 | ASTM D150 |
| Flammability | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Oxygen Index | 25 | % | ASTM D2863 |
| Extrusion | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 82.2 | °C | |
| Drying Time | 3.0 | hr | |
| Cylinder Zone 1 Temp. | 185 | °C | |
| Cylinder Zone 2 Temp. | 193 | °C | |
| Cylinder Zone 3 Temp. | 202 | °C | |
| Cylinder Zone 4 Temp. | 213 | °C | |
| Melt Temperature | 213 to 218 | °C | |
| Die Temperature | 216 | °C |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| RTP 4083 AR 10 TFE 15 SI 2 | RTP Company | PPA | RTP |
| SWANCOR Epoxy 905-2 | SWANCOR IND. CO., LTD. | Epoxy | SWANCOR Epoxy |
| Geon™ Vinyl Wire & Cable WA9001 | PolyOne Corporation | PVC, Flexible | Geon™ Vinyl Wire & Cable |
| Infino NH-1017SG | LOTTE ADVANCED MATERIALS CO., LTD. | PC+ABS | Infino |
| Sylvin 9077-70 Grey 9516 | Sylvin Technologies Incorporated | PVC, Unspecified | Sylvin |
