Order Products : sales@su-jiao.com
Next Nylon 6 Prime Series NXH-01NC
| Category: | Nylon 6 , Polyamide 6 |
| Manufacturer: | Next Polymers Ltd. |
| Trademark: | Next Nylon 6 Prime Series |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | Ml2YWw_Next-Nylon-6-Prime-Series-NXH-01NC.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Description PA6 Un Filled Natural Compound Product Applications This Grade is used in all sectors of industry Fasteners, clip, gears, Bobbin Hand mixer cover Benefits Offering an execellent Flow ability. It is particularly suitble for the production of technical molding with fast injection cycle. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| RoHS Compliance |
|
| Appearance |
|
| Processing Method |
|
| Physical | Dry | Conditioned | Unit | Test Method |
|---|---|---|---|---|
| Specific Gravity | 1.13 | -- | g/cm³ | ASTM D792 |
| Molding Shrinkage | ASTM D955 | |||
| Flow | 1.2 | -- | % | |
| Across Flow | 1.2 | -- | % | |
| Water Absorption | ASTM D570 | |||
| 23°C, 24 hr | 2.6 | -- | % | |
| Saturation 1 | 9.5 | -- | % |
| Hardness | Dry | Conditioned | Unit | Test Method |
|---|---|---|---|---|
| Rockwell Hardness | ASTM D785 | |||
| M-Scale | 70 | -- | ||
| R-Scale | 80 | -- |
| Mechanical | Dry | Conditioned | Unit | Test Method |
|---|---|---|---|---|
| Tensile Strength | 75.0 | 55.0 | MPa | ASTM D638 |
| Tensile Elongation (Break) | > 50 | > 50 | % | ASTM D638 |
| Flexural Modulus | 3000 | 2300 | MPa | ASTM D790 |
| Flexural Strength | 110 | 95.0 | MPa | ASTM D790 |
| Impact | Dry | Conditioned | Unit | Test Method |
|---|---|---|---|---|
| Notched Izod Impact (23°C) | 49 | 78 | J/m | ASTM D256 |
| Thermal | Dry | Conditioned | Unit | Test Method |
|---|---|---|---|---|
| Deflection Temperature Under Load | ASTM D648 | |||
| 0.45 MPa, Unannealed | 150 | -- | °C | |
| 1.8 MPa, Unannealed | 70.0 | -- | °C | |
| Melting Temperature | 220 | -- | °C | ASTM D2117 |
| Electrical | Dry | Conditioned | Unit | Test Method |
|---|---|---|---|---|
| Surface Resistivity | -- | 1.0E+14 | ohms | IEC 60093 |
| Volume Resistivity | 1.0E+15 | 1.0E+13 | ohms·cm | IEC 60093 |
| Electric Strength | 28 | -- | kV/mm | IEC 60243-1 |
| Comparative Tracking Index | 600 | -- | V | IEC 60112 |
| Flammability | Dry | Conditioned | Unit | Test Method |
|---|---|---|---|---|
| Flame Rating (0.800 mm) | HB | -- | UL 94 |
| Injection | Dry | Unit | |
|---|---|---|---|
| Drying Temperature - Hot Air Dryer | 80.0 | °C | |
| Drying Time | 4.0 to 6.0 | hr | |
| Suggested Max Moisture | 0.20 | % | |
| Rear Temperature | 230 to 240 | °C | |
| Middle Temperature | 240 to 250 | °C | |
| Front Temperature | 250 to 260 | °C | |
| Mold Temperature | 60.0 to 80.0 | °C |
| Note Message | |
|---|---|
| 1 . | Immersed |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Radilon® S CV300 100 NAT | Radici Plastics | Nylon 6 | Radilon® |
| WPP PP PPC3GF1.5-Black | Washington Penn Plastic Co. Inc. | PP Copolymer | WPP PP |
| Westlake LDPE EF601 | Westlake Chemical Corporation | LDPE | Westlake LDPE |
| Ad-Tech Epoxy ES-216-AC | Ad-Tech Plastic Systems Corp. | Epoxy | Ad-Tech Epoxy |
| ALFATER XL® A35I 2GP0050 | ALBIS PLASTIC GmbH | TPV | ALFATER XL® |
