Order Products : sales@su-jiao.com
CERTENE™ LLHF-116XF
| Category: | LLDPE , Linear Low Density Polyethylene |
| Manufacturer: | Muehlstein |
| Trademark: | CERTENE™ |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | Mhskd1_CERTENE-LLHF-116XF.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| LLHF-116XF is a certified prime, Super-Hexene Copolymer developed for blown film with outstanding Impact Strength and Toughness. LLHF-116XF features good processability and exhibits exceptional Elmendorf Tear strength and Puncture resistance. LLHF-116XF major applications include high strength liners (industrial and consumer), super strong carry-on-bags and industrial packaging. LLHF-116XF contains High slip and High antiblock. LLHF-116XF complies with FDA regulation 21CFR 177.1520, covering safe use of polyolefin articles intended for direct food contact. LLHF-116XF also complies with most international regulations concerning the use of Polyethylene in contact with food articles. |
| General Information | |
|---|---|
| Additive |
|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.916 | g/cm³ | ASTM D1505 |
| Melt Mass-Flow Rate (MFR) (190°C/2.16 kg) | 0.75 | g/10 min | ASTM D1238 |
| Films | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Film Thickness - Tested | 25 | µm | |
| Tensile Strength | ASTM D882 | ||
| MD : Yield, 25 µm | 8.96 | MPa | ASTM D882 |
| TD : Yield, 25 µm | 8.96 | MPa | ASTM D882 |
| MD : Break, 25 µm | 40.7 | MPa | ASTM D882 |
| TD : Break, 25 µm | 33.1 | MPa | ASTM D882 |
| Tensile Elongation | ASTM D882 | ||
| MD : Break, 25 µm | 690 | % | ASTM D882 |
| TD : Break, 25 µm | 960 | % | ASTM D882 |
| Dart Drop Impact (25 µm) | 550 | g | ASTM D1709 |
| Elmendorf Tear Strength | ASTM D1922 | ||
| MD : 25 µm | 420 | g | ASTM D1922 |
| TD : 25 µm | 680 | g | ASTM D1922 |
| Optical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Haze (25.4 µm, Blown Film) | 22 | % | ASTM D1003 |
| Additional Information |
|---|
| Film Specimen: 1.0 mil (25 micron) film, blow-up-ratio 3 :1. |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| RTP 1385 TFE 10 | RTP Company | PPS | RTP |
| Premi-Glas® 2103-10 CR-SX | Premix, Inc. | TS, Unspecified | Premi-Glas® |
| Eastar™ DN010 | Eastman Chemical Company | Copolyester | Eastar™ |
| Dynaprene® VE0055A | Nantex Industry Co., Ltd. | TPE | Dynaprene® |
| Durethan® BC 304 H3.0 000000 | LANXESS GmbH | Nylon 6 | Durethan® |
