Order Products : sales@su-jiao.com
SABIC® STAMAX 20YM243
| Category: | PP, Unspecified , Polypropylene |
| Manufacturer: | Saudi Basic Industries Corporation (SABIC) |
| Trademark: | SABIC® STAMAX |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | MgevT3_SABICSTAMAX20YM243.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| SABIC® STAMAX 20YM243 is a 20% long glass fiber reinforced grade. The glass fibres are chemically coupled to the PP matrix, resulting in high stiffness and strength. |
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Features |
|
| Uses |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 1.04 | g/cm³ | ISO 1183 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Modulus | ISO 527-2/1B | ||
| 23°C, injection molding | 4800 | MPa | ISO 527-2/1B |
| 80°C, injection molding | 3400 | MPa | ISO 527-2/1B |
| 120°C, injection molding | 2800 | MPa | ISO 527-2/1B |
| Tensile Stress 1 | ISO 527-2 | ||
| 23°C, injection molding | 90.0 | MPa | ISO 527-2 |
| 80°C, injection molding | 60.0 | MPa | ISO 527-2 |
| 120°C, injection molding | 45.0 | MPa | ISO 527-2 |
| Tensile Strain (Break, 23°C, Injection Molded) | 2.5 | % | ISO 527-2/1B |
| Flexural Modulus | ISO 178 | ||
| 23°C, injection molding | 4100 | MPa | ISO 178 |
| 80°C, injection molding | 2850 | MPa | ISO 178 |
| Flexural Stress | ISO 178 | ||
| 23°C, injection molding | 120 | MPa | ISO 178 |
| 80°C, injection molding | 75.0 | MPa | ISO 178 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Charpy Notched Impact Strength | ISO 179/1eA | ||
| -30°C, injection molding | 18 | kJ/m² | ISO 179/1eA |
| 23°C, injection molding | 14 | kJ/m² | ISO 179/1eA |
| Charpy Unnotched Impact Strength | ISO 179/1eU | ||
| -30°C, injection molding | 24 | kJ/m² | ISO 179/1eU |
| 23°C, injection molding | 44 | kJ/m² | ISO 179/1eU |
| Falling Dart Impact - Total Energy 2(23°C) | 37.0 | J/cm | ISO 6603-2 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Heat Deflection Temperature (1.8 MPa, Unannealed) | 156 | °C | ISO 75-2/A |
| CLTE - Flow | ASTM D696 | ||
| -30 to 30°C | 5.9E-5 | cm/cm/°C | ASTM D696 |
| 23 to 80°C | 5.4E-5 | cm/cm/°C | ASTM D696 |
| Note Message | |
|---|---|
| 1 . | Type 1B |
| 2 . | Injection Molded |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| RTP 205A Z | RTP Company | Nylon 6 | RTP |
| Selvol™ E 103 | Sekisui Chemical Company, Ltd. | PVOH | Selvol™ |
| Laticonther 80 GR/50 | LATI S.p.A. | PPS | Laticonther |
| LARIPUR® LPR 6520 | COIM S.p.A. | TPU-Polyester | LARIPUR® |
| Starex GR-4005 | LOTTE ADVANCED MATERIALS CO., LTD. | ABS | Starex |
