Order Products : sales@su-jiao.com
Borealis PE CA7230
| Category: | LDPE , Low Density Polyethylene |
| Manufacturer: | Borealis AG |
| Trademark: | Borealis PE |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | Mg9WlY_Borealis-PE-CA7230.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| CA7230 is a low-density polyethylene for extrusion coating. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.923 | g/cm³ | ISO 1183 |
| Melt Mass-Flow Rate (MFR) (190°C/2.16 kg) | 4.5 | g/10 min | ISO 1133 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Melting Temperature | 109 | °C | ISO 11357-3 |
| Extrusion | Nominal Value | Unit | |
|---|---|---|---|
| Cylinder Zone 1 Temp. | 240 | °C | |
| Cylinder Zone 2 Temp. | 290 | °C | |
| Cylinder Zone 3 Temp. | 320 | °C | |
| Cylinder Zone 4 Temp. | 325 | °C | |
| Cylinder Zone 5 Temp. | 325 | °C | |
| Maximum Coating Speed 1 | 12 | m/sec | |
| Minimum Coating Weight 2 | 7.0 | g/m² | |
| Neck-in 3 | 61.0 | mm |
| Note Message | |
|---|---|
| 1 . | BTM 14921 |
| 2 . | BTM 14922 |
| 3 . | BTM 14920 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| UBE Nylon P7115 U | UBE Engineering Plastics, S.A. | Nylon 612 | UBE Nylon |
| Ad-Tech Polyester NO. 10 | Ad-Tech Plastic Systems Corp. | Polyester, TS | Ad-Tech Polyester |
| DISTRUMID 6 HI | Distrupol | Nylon 6 | DISTRUMID |
| Plasmer 1090N/1002 | HYUNDAI EP Co., Ltd. | TPE | Plasmer |
| HiFill® PP LGF30 2000 BK 12MM | Techmer Engineered Solutions | PP, Unspecified | HiFill® |
