Order Products : sales@su-jiao.com
POLYLAN AX4100
| Category: | ABS , Acrylonitrile Butadiene Styrene |
| Manufacturer: | POLYMA Kunststoff GmbH & Co. KG |
| Trademark: | POLYLAN |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | Mg2vGG_POLYLAN-AX4100.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| POLYLAN AX4100 is an Acrylonitrile Butadiene Styrene (ABS) product. It is available in Europe. Primary characteristic: heat resistant. |
| General Information | |
|---|---|
| Features |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 1.05 | g/cm³ | ISO 1183 |
| Melt Mass-Flow Rate (MFR) (200°C/10.0 kg) | 5.0 | g/10 min | ASTM D1238, ISO 1133 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Rockwell Hardness (R-Scale, 23°C) | 107 | ASTM D785, ISO 2039-2 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Modulus (23°C) | 2450 | MPa | ASTM D638, ISO 527-2 |
| Tensile Strength (Yield, 23°C) | 39.0 | MPa | ASTM D638, ISO 527-2 |
| Flexural Strength (23°C) | 69.0 | MPa | ASTM D790, ISO 178 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact (23°C, 6.35 mm) | 98 | J/m | ASTM D256 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load | |||
| 1.8 MPa, Unannealed, 12.7 mm | 109 | °C | ASTM D648 |
| 1.8 MPa, Unannealed | 109 | °C | ISO 75-2/A |
| 1.8 MPa, Annealed, 12.7 mm | 120 | °C | ASTM D648 |
| 1.8 MPa, Annealed | 120 | °C | ISO 75-2/A |
| Vicat Softening Temperature | 128 | °C | ISO 306/A, ASTM D1525 1 |
| Note Message | |
|---|---|
| 1 . | Loading 1 (10 N) |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| TATREN® HM 50 46 | Slovnaft Petrochemicals, s.r.o. | PP Homopolymer | TATREN® |
| FERREX® GPP40CC83WH | Ferro Corporation | PP Homopolymer | FERREX® |
| Kingfa PET-RG20 | Kingfa | PET | Kingfa |
| HiFill® PA6 GF30 IM HS L | Techmer Engineered Solutions | Nylon 6 | HiFill® |
| Lionpol LC-62306 | Lion Polymers Incorporated | TPE | Lionpol |
