Order Products : sales@su-jiao.com
TAROBLEND 85 X0
| Category: | PC+ABS , Polycarbonate + ABS |
| Manufacturer: | Taro Plast S.p.A. |
| Trademark: | TAROBLEND |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | MdsUro_TAROBLEND-85-X0.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
PC/ABS alloy self extinguishing UL94 V0, high thermal resistance, good mechanical properties and dimensional stability. UL94 approved V0 all colors at 1,7 mm. UL746B approved. Available: all colors. |
| General Information | |
|---|---|
| Features |
|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.20 | g/cm³ | ASTM D792, ISO 1183 |
| Molding Shrinkage | ASTM D955 | ||
| Flow | 0.40 to 0.70 | % | |
| Across Flow | 0.40 to 0.70 | % | |
| Water Absorption | |||
| 23°C, 24 hr | 0.10 | % | ASTM D570, ISO 62 |
| Saturation | 0.40 | % | ASTM D570 |
| Saturation, 23°C | 0.40 | % | ISO 62 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength (Yield) | 50.0 | MPa | ASTM D638, ISO 527-2 |
| Flexural Modulus | 2100 | MPa | ASTM D790, ISO 178 |
| Flexural Stress | |||
| -- 1 | 70.0 | MPa | ISO 178 |
| Yield | 70.0 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Charpy Notched Impact Strength 2(23°C) | 20 | kJ/m² | ASTM D256, ISO 179 |
| Charpy Unnotched Impact Strength 3(23°C) | No Break | ASTM D256, ISO 179 | |
| Notched Izod Impact | 500 | J/m | ISO 180, ASTM D256 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load (1.8 MPa, Unannealed) | 110 | °C | ASTM D648, ISO 75-2/A |
| Vicat Softening Temperature | |||
| -- | 135 | °C | ASTM D1525, ISO 306/A50 5 4 |
| -- | 125 | °C | ASTM D1525, ISO 306/B50 6 5 |
| Ball Pressure Test (125°C) | Pass | VDE 0470 |
| Electrical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Comparative Tracking Index (Solution A) | > 200 | V | IEC 60112 |
| Flammability | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Flame Rating (1.70 mm) | V-0 | UL 94 | |
| Glow Wire Ignition Temperature | 960 | °C | IEC 60695-2-13 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | |||
| -- | 80.0 | °C | |
| Pre-heater | 80.0 to 100 | °C | |
| Drying Time | |||
| -- | 1.0 | hr | |
| Pre-heater | 3.0 | hr | |
| Processing (Melt) Temp | 230 to 270 | °C | |
| Mold Temperature | 50.0 to 70.0 | °C | |
| Injection Rate | Moderate |
| Note Message | |
|---|---|
| 1 . | Yield |
| 2 . | 6x4x50 mm |
| 3 . | 6x4x50 mm |
| 4 . | Rate A (50°C/h), Loading 1 (10 N) |
| 5 . | Rate A (50°C/h), Loading 2 (50 N) |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Daelim Po1y® LA-25 | DAELIM INDUSTRIAL CO., LTD. | LLDPE | Daelim Po1y® |
| GAPEX® RPP25EB74HB GRAY | Ferro Corporation | PP Homopolymer | GAPEX® |
| Generic PP, High Crystal - Talc | Generic | PP, High Crystal | Generic |
| INSTRUC PEIGF10 | Infinity LTL Engineered Compounds | PEI | INSTRUC |
| Karina IVORY PVC COMPOUND -E 900-35/ 1-B | Karina Ind. e Com. de Plásticos Ltda | PVC, Unspecified | Karina |
