Order Products : sales@su-jiao.com
ASI POLYETHYLENE EVA
| Category: | PE, Unspecified , Polyethylene |
| Manufacturer: | A. Schulman Inc. |
| Trademark: | ASI POLYETHYLENE |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | MdRbno_ASI-POLYETHYLENE-EVA.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| EVA is a general purpose-molding grade having a nominal 10% VA content. Typical properties are summarized below which were obtained from injection molded specimens tested under accepted laboratory conditions and procedures. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 0.930 | g/cm³ | ASTM D792 |
| Melt Mass-Flow Rate (MFR) (190°C/2.16 kg) | 10 | g/10 min | ASTM D1238 |
| Vinyl Acetate Content | 10.0 | wt% |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength (Yield) | 11.7 | MPa | ASTM D638 |
| Tensile Elongation (Break) | 700 | % | ASTM D638 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Vicat Softening Temperature | 79.4 | °C | ASTM D1525 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Diakon® ST35G7 | Lucite International Inc. | Acrylic (PMMA) | Diakon® |
| EMERGE™ PC 4310-6 | Trinseo | PC | EMERGE™ |
| Estane® 5714 TPU | Lubrizol Advanced Materials, Inc. | TPU-Polyether | Estane® |
| Paracril® X3675 | INSA | NBR | Paracril® |
| Sylvin 8200-88C Green 3208 | Sylvin Technologies Incorporated | PVC, Unspecified | Sylvin |
