Order Products : sales@su-jiao.com

Lushan M-1

Category:	Polyolefin, Unspecified , Polyolefin
Manufacturer:	Guangzhou Lushan New Materials Co., Ltd
Trademark:	Lushan
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	MYUm8R_Lushan-M-1.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

Message
Adhesive Resin for Barrier Container and Tube Adhesive resin Lushan series for barrier container and tube is used for bonding a wide variety of materials. It's most often used to adhering PE and EVOH, PP and EVOH, etc. Adhesive resins Lushan series for barrier container and tube can be used in a variety of co-extrusion coating and laminating applications, such as high barrier HDPE/EVOH oil tank, HDPE/polyamide bottles for agricultural chemicals and other composite barrier bottles for food packaging, etc. Adhesive resin Lushan series for food package complys with FDA 21CFR175.105 and suitable for indirect food contact.

Message

Adhesive Resin for Barrier Container and Tube

Adhesive resin Lushan series for barrier container and tube is used for bonding a wide variety of materials. It's most often used to adhering PE and EVOH, PP and EVOH, etc.

Adhesive resins Lushan series for barrier container and tube can be used in a variety of co-extrusion coating and laminating applications, such as high barrier HDPE/EVOH oil tank, HDPE/polyamide bottles for agricultural chemicals and other composite barrier bottles for food packaging, etc.

Adhesive resin Lushan series for food package complys with FDA 21CFR175.105 and suitable for indirect food contact.

General Information
Features	Food Contact Acceptable
Uses	Adhesives Agricultural Chemicals Bottles Bottles Containers Food Packaging Fuel Tanks Tubing
Agency Ratings	FDA 21 CFR 175.105
Appearance	Clear/Transparent
Forms	Granules
Processing Method	Coextrusion Laminating

Physical	Nominal Value	Unit	Test Method
Density	0.921	g/cm³	ASTM D1505
Melt Mass-Flow Rate (MFR)	1.5	g/10 min	ASTM D1238

Mechanical	Nominal Value	Unit	Test Method
Tensile Strength (Yield)	25.0	MPa	ASTM D638
Tensile Elongation (Break)	600	%	ASTM D638

Thermal	Nominal Value	Unit	Test Method
Brittleness Temperature	-70.0	°C	ASTM D746
Vicat Softening Temperature	104	°C	ASTM D1525
Peak Melting Temperature	123	°C	ASTM D2117

Resin Grade	Manufacturer	Category	Trademark
Delta N66R-1GB80	Delta Polymers	Nylon 66	Delta
EPO-TEK® 731	Epoxy Technology Inc.	Epoxy	EPO-TEK®
K-Resin® SBC BK10	Chevron Phillips Chemical Company LLC	SBC	K-Resin® SBC
LUVOCOM® 65-9048	Lehmann & Voss & Co.	PP Copolymer	LUVOCOM®
Pinnacle PP 2120H	Pinnacle Polymers	PP Impact Copolymer	Pinnacle PP