Order Products : sales@su-jiao.com

PPO™ 843 resin

Category:	PPE+PS , Polyphenylene Ether + PS
Manufacturer:	SABIC Innovative Plastics
Trademark:	PPO™
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	MY66w9_PPO-843-resin.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

Message
PPO* 843 resin is a medium-high molecular weight copolymer based on Polyphenylene Ether (PPE) and Siloxane. PPO* is intended for use as an additive or a building block in a variety of thermoplastics and thermoplastic elastomers like Styrenic Block Copolymers. PPO* resin can be used to improve properties like Heat Distortion and Creep Resistance. It is hydrolytically stable and non-hydroscopic (typically less than 0.2% water uptake). The polymer is soluble in common organic solvents like toluene, chloroform, and THF. Chemical name: PPE-Siloxane copolymer Formula: (C8H8O)n(SiC2H6O)m Regulatory Status: Complies with EC Reg. No. 10/2011 as amended through EC Reg. No. 2015/174.

Message

PPO* 843 resin is a medium-high molecular weight copolymer based on Polyphenylene Ether (PPE) and Siloxane. PPO* is intended for use as an additive or a building block in a variety of thermoplastics and thermoplastic elastomers like Styrenic Block Copolymers. PPO* resin can be used to improve properties like Heat Distortion and Creep Resistance. It is hydrolytically stable and non-hydroscopic (typically less than 0.2% water uptake). The polymer is soluble in common organic solvents like toluene, chloroform, and THF. Chemical name: PPE-Siloxane copolymer Formula: (C8H8O)n(SiC2H6O)m Regulatory Status: Complies with EC Reg. No. 10/2011 as amended through EC Reg. No. 2015/174.

General Information
Features	Copolymer Hydrolytically Stable Medium Molecular Weight
Uses	Additive
Agency Ratings	EU 10/2011
Forms	Powder

Physical	Nominal Value	Unit	Test Method
Density ¹	0.476	g/cm³	ISO 1183
D	2.60		Internal Method
Intrinsic Viscosity	0.40	dl/g	Internal Method
Mean Particle Size	400.0	µm	Internal Method
Mn	14800		Internal Method
Mw	36000		Internal Method
Phenolic End-group Content	1000	ppm	Internal Method
Tg (half width)	216	°C	Internal Method

Additional Information	Nominal Value	Unit	Test Method
Toluene Content	< 1500	ppm	Internal Method

Note Message
1 .	Bulk Density

Resin Grade	Manufacturer	Category	Trademark
SABIC® PPcompound 3240EH	Saudi Basic Industries Corporation (SABIC)	PP Homopolymer	SABIC® PPcompound
XENOY™ 1731 resin	SABIC Innovative Plastics	PC+PBT	XENOY™
APEX® RM 8216	Teknor Apex Company	PVC, Rigid	APEX®
Celstran® PBT-GF50-08	Celanese Corporation	PBT	Celstran®
DIOSHY® LP-830	DIOSHY Co.,Ltd.	SEBS+SBS	DIOSHY®