UmaPET HC Datasheet,PET,Ester Industries Ltd.-SHANGHAI SUSHENG

Message
KEY FEATURES UmaPET HC is transparent film possessing high clarity, high gloss, low haze and good frictional and thermal properties. The Film can be used for direct contact with food and complies with FDA regulation 21CFR177.1630 sections (f) and (g). APPLICATIONS The film is widely used for high gloss metallizing applications. Labels face stock, Drawing and Drafting end use applications. Hologram, Glitter Powder and high end packaging applications for high gloss.

General Information
Features	Food Contact Acceptable High Clarity High Gloss Low Friction Metallizable
Uses	Film Labels Packaging
Agency Ratings	FDA 21 CFR 177.1630 Sections (f) & (g)
Appearance	Clear/Transparent
Forms	Film

Physical	Nominal Value	Unit	Test Method
Molding Shrinkage			ASTM D1204
Flow : 150°C, 30 min, 0.0230 mm	2.5	%
Flow : 150°C, 30 min, 0.0360 mm	2.5	%
Flow : 150°C, 30 min, 0.0500 mm	2.0	%
Across Flow : 150°C, 30 min, 0.0230 mm	0.40	%
Across Flow : 150°C, 30 min, 0.0360 mm	0.40	%
Across Flow : 150°C, 30 min, 0.0500 mm	0.40	%

Mechanical	Nominal Value	Test Method
Coefficient of Friction		ASTM D1894
vs. Itself - Dynamic ¹	0.40
vs. Itself - Dynamic ²	0.42
vs. Itself - Dynamic ³	0.40
vs. Itself - Static ⁴	0.48
vs. Itself - Static ⁵	0.50
vs. Itself - Static ⁶	0.50

Films	Nominal Value	Unit	Test Method
Film Thickness - Tested	23 36 50	µm
Film Thickness - Recommended / Available	23, 36, 50 µm
Tensile Strength			ASTM D882
MD : Break, 23 µm	186	MPa
MD : Break, 36 µm	177	MPa
MD : Break, 50 µm	167	MPa
TD : Break, 23 µm	206	MPa
TD : Break, 36 µm	186	MPa
TD : Break, 50 µm	177	MPa
Tensile Elongation			ASTM D882
MD : Break, 23 µm	100	%
MD : Break, 36 µm	130	%
MD : Break, 50 µm	140	%
TD : Break, 23 µm	90	%
TD : Break, 36 µm	120	%
TD : Break, 50 µm	130	%
Yield			Internal Method
23.0 µm	31.0	m²/kg
36.0 µm	19.8	m²/kg
50.0 µm	14.1	m²/kg

Additional Information	Nominal Value	Unit	Test Method
Wetting Tension - Plain side			ASTM D2578
23.0 µm	44	dyne/cm
36.0 µm	44	dyne/cm
50.0 µm	44	dyne/cm

Optical	Nominal Value	Unit	Test Method
Transmittance			ASTM D1003
23.0 µm	90.0	%
36.0 µm	90.0	%
50.0 µm	90.0	%
Haze			ASTM D1003
23.0 µm	1.6	%
36.0 µm	1.8	%
50.0 µm	2.0	%

Category:	PET , Polyethylene Terephthalate
Manufacturer:	Ester Industries Ltd.
Trademark:	UmaPET
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	MXgfRG_UmaPET-HC.pdf
PRICE:	Order Products email sales@su-jiao.com

Resin Grade	Manufacturer	Category	Trademark
Razamid® B111 GR35	Razin™ Engineering Plastics	Nylon 6	Razamid®
SEETEC LLDPE U8835	Lotte Chemical Corporation	LLDPE	SEETEC LLDPE
SLOVALEN® PH 69 GF 30 TS	Plastcom	PP, Unspecified	SLOVALEN®
Hostacom TRC 364NA	LyondellBasell Industries	TPO (POE)	Hostacom
Vipel® F010-H2O-00	AOC, L.L.C.	Vinyl Ester	Vipel®