Order Products : sales@su-jiao.com
Baytec® ME-230 (97A/55D)
| Category: | PUR-Ether/MDI , Polyurethane (Polyether, MDI) |
| Manufacturer: | Covestro - PUR |
| Trademark: | Baytec® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | MXbxGF_Baytec-ME-230-97A-55D-.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Baytec ME-230 is a modified diphenylmethane diisocyanate (MDI)-terminated polyether prepolymer based on polytetramethylene ether glycol (PTMEG). |
| General Information | |
|---|---|
| Forms |
|
| Hardness | Nominal Value | Test Method | |
|---|---|---|---|
| Durometer Hardness | ASTM D2240 | ||
| Shaw A | 97 | ASTM D2240 | |
| Shaw D | 55 | ASTM D2240 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Taber Abrasion Resistance (1000 Cycles) | 34.0 | mg | ASTM D3489 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress | ASTM D412 | ||
| 100% strain | 11.4 | MPa | ASTM D412 |
| 200% strain | 14.3 | MPa | ASTM D412 |
| 300% strain | 18.3 | MPa | ASTM D412 |
| Tensile Strength (Break) | 28.8 | MPa | ASTM D412 |
| Tensile Elongation (Break) | 470 | % | ASTM D412 |
| Tear Strength | |||
| -- 1 | 99.8 | kN/m | ASTM D624 |
| Cracking | 53 | kN/m | ASTM D1938 |
| Compression Set (70°C, 22 hr) | 25 | % | ASTM D395B |
| Bayshore Resilience | 65 | % | ASTM D2632 |
| Thermoset | Nominal Value | ||
|---|---|---|---|
| Thermoset Components | |||
| Part C 2 | Mixing ratio by weight: 20 | ||
| Component a 3 | Mixing ratio by weight: 100 | ||
| Component B 4 | Mixing ratio by weight: 80 |
| Additional Information |
|---|
| Appearance: Colorless to pale yellow liquidNCO: 22.7 to 23.3 wt%Viscosity at 25°C: 300 mPa-sSpecific Gravity at 25°C: 1.14Flash Point, PMCC: >93°CDensity at 25°C: 9.5 lb/galMelt Point: 5 to 10°C |
| Note Message | |
|---|---|
| 1 . | C mould |
| 2 . | 1,4 Butone Diol |
| 3 . | Isocyanate |
| 4 . | Polyol |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Manner Flexible PVC X4770 | Manner Plastics, L.P. | PVC, Flexible | Manner Flexible PVC |
| MARPOL® LL6S 801 | Marco Polo International, Inc. | LLDPE | MARPOL® |
| ICORENE® N6404 | ICO Polymers EMEA, A Division of A. Schulman | PS (GPPS) | ICORENE® |
| IDI BMC 46-16 | IDI Composites International | TS, Unspecified | IDI BMC |
| Sylvin 9940-75 BLACK | Sylvin Technologies Incorporated | PVC, Unspecified | Sylvin |
