Order Products : sales@su-jiao.com
Formolene® 5143H
| Category: | PP Homopolymer , Polypropylene Homopolymer |
| Manufacturer: | Formosa Plastics Corporation, U.S.A. |
| Trademark: | Formolene® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | MRv8Hp_Formolene-5143H.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Formolene 5143 H is a high viscosity homopolymer designed primarily for thermoformed cups and container applications. It contains a unique combination of stabilizers, nucleators and antistats that give it an excellent balance of stiffness and impact strength and high clarity. Formolene 5143 H offers an advantage in processing over current polypropylenes used for thermoforming, which includes a broader forming window and faster setup time. Formolene 5143 H meets all requirements of the U. S. Food and Drug Administration as specified in 21 CFR 177.1520, covering safe use of polyolefin articles and components of articles intended for direct food contact. |
| General Information | |
|---|---|
| Additive |
|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.905 | g/cm³ | ASTM D1505 |
| Melt Mass-Flow Rate (MFR) (230°C/3.8 kg) | 2.5 | g/10 min | ASTM D1238 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength 1(Yield, Injection Molded) | 37.9 | MPa | ASTM D638 |
| Tensile Elongation 2(Yield, Injection Molded) | 9.0 | % | ASTM D638 |
| Flexural Modulus - 1% Secant 3(Injection Molded) | 1830 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact (23°C, Injection Molded) | 48 | J/m | ASTM D256 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load (0.45 MPa, Unannealed, Injection Molded) | 116 | °C | ASTM D648 |
| Optical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Haze (25.4 µm) | 18 | % | ASTM D1003 |
| Note Message | |
|---|---|
| 1 . | 50 mm/min |
| 2 . | 50 mm/min |
| 3 . | 1.3 mm/min |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Adell PBT HT-16 | Adell Plastics, Inc. | PBT | Adell PBT |
| HiFill® TPU 1000 | Techmer Engineered Solutions | TPU, Unspecified | HiFill® |
| Lupolen 2421 F | LyondellBasell Industries | LDPE | Lupolen |
| Sylvin 4225-60 Natural | Sylvin Technologies Incorporated | PVC, Unspecified | Sylvin |
| Sylvin 3252-65 Black | Sylvin Technologies Incorporated | PVC, Unspecified | Sylvin |
