Order Products : sales@su-jiao.com
Geon™ Vinyl Rigid Extrusion L7703
| Category: | PVC, Rigid , Rigid Polyvinyl Chloride |
| Manufacturer: | PolyOne Corporation |
| Trademark: | Geon™ Vinyl Rigid Extrusion |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | MQsPIb_Geon-Vinyl-Rigid-Extrusion-L7703.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Geon™Vinyl Rigid Extrusion L7703 is a rigid PVC product,. It can be processed by extrusion molding of profiles and is available in North America, Africa and the Middle East, Latin America, Europe or Asia Pacific. Typical application areas are: outdoor applications. |
| General Information | |
|---|---|
| Uses |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.49 | g/cm³ | ASTM D792 |
| PVC Cell Classification | 1-42234-33-0101 | ASTM D4216 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore D, 15 sec) | 84 | ASTM D2240 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Modulus 1 | 3280 | MPa | ASTM D638 |
| Tensile Strength 2(Yield) | 43.6 | MPa | ASTM D638 |
| Flexural Modulus | 3350 | MPa | ASTM D790 |
| Flexural Strength | 89.6 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact (23°C, 3.18 mm, Compression Molded) | 480 | J/m | ASTM D256A |
| Drop Impact Resistance | ASTM D4226 | ||
| 23°C 3 | 75.6 | J/cm | ASTM D4226 |
| 23°C 4 | 75.6 | J/cm | ASTM D4226 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load (1.8 MPa, Unannealed, 3.18 mm) | 73.9 | °C | ASTM D648 |
| CLTE - Flow | 6.0E-5 | cm/cm/°C | ASTM D696 |
| Additional Information | Nominal Value | ||
|---|---|---|---|
| Ease of Sizing | Good | ||
| 注释：分档是采用注塑模制样品进行缺口摆锤冲击试验确定的。 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Processing (Melt) Temp | 182 - 199 | °C |
| Note Message | |
|---|---|
| 1 . | Type 1, 5.1 mm/min |
| 2 . | Type 1, 5.1 mm/min |
| 3 . | Procedure A, C.125 Throwing |
| 4 . | Procedure B, C.125 Throwing |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| CALP 3850G | Lion Idemitsu Composites Co., Ltd. | ABS | CALP |
| Fenochem T 5700 | Chemiplastica, Inc. | Phenolic | Fenochem |
| Fluon® PTFE CD097E | Asahi Glass Co., Ltd. | PTFE | Fluon® |
| GAPEX® RPP30EU55HB BLACK | Ferro Corporation | PP Copolymer | GAPEX® |
| Ingeo™ 6204D | NatureWorks® LLC | PLA | Ingeo™ |
