Order Products : sales@su-jiao.com
TECACOMP® PA66 TRM black 9124
| Category: | Nylon 66 , Polyamide 66 |
| Manufacturer: | Ensinger GmbH |
| Trademark: | TECACOMP® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | MPmcUs_TECACOMPPA66TRMblack9124.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
Main features
Target Industries
|
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Features |
|
| Uses |
|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 1.30 | g/cm³ | |
| Apparent Density | 0.64 | g/cm³ | ISO 60 |
| Melt Mass-Flow Rate (MFR) (280°C/5.0 kg) | 57 | g/10 min | ISO 1133 |
| Melt Volume-Flow Rate (MVR) (280°C/5.0 kg) | 50.0 | cm³/10min | ISO 1133 |
| Molding Shrinkage | ISO 294-4 | ||
| Transverse flow | 1.0 | % | ISO 294-4 |
| Flow | 0.37 | % | ISO 294-4 |
| Water Absorption (Equilibrium, 23°C, 50% RH) | 1.9 | % | ISO 62 |
| Viscosity Number (H2SO4 (Sulphuric Acid)) | 150 | cm³/g | ISO 307 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Modulus | 9000 | MPa | ISO 527-2/50 |
| Tensile Stress | 150 | MPa | ISO 527-2/50 |
| Tensile Strain (Break) | 3.0 | % | ISO 527-2/50 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Charpy Unnotched Impact Strength | 35 | kJ/m² | ISO 179/1eU |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Heat Deflection Temperature | |||
| 0.45 MPa, not annealed | 260 | °C | ISO 75-2/B |
| 1.8 MPa, not annealed | 250 | °C | ISO 75-2/A |
| Glass Transition Temperature | DIN 53765 | ||
| -- 1 | 5.00 | °C | DIN 53765 |
| -- 2 | 72.0 | °C | DIN 53765 |
| Melting Temperature | 260 | °C | DIN 53765 |
| Linear thermal expansion coefficient | ISO 11359-2 | ||
| Flow : 23 to 45°C | 2.4E-5 | cm/cm/°C | ISO 11359-2 |
| Flow : 70 to 120°C | 2.2E-5 | cm/cm/°C | ISO 11359-2 |
| Horizontal : 23 to 45°C | 1.1E-4 | cm/cm/°C | ISO 11359-2 |
| Horizontal : 70 to 120°C | 1.4E-4 | cm/cm/°C | ISO 11359-2 |
| Thermal Conductivity | DIN EN 821 | ||
| -- 3 | 0.30 | W/m/K | DIN EN 821 |
| -- 4 | 0.60 | W/m/K | DIN EN 821 |
| Service Temperature | |||
| long term | 110 | °C | |
| short term | 170 | °C |
| Electrical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Volume Resistivity | 1.3E+3 | ohms·cm | ISO 3915 |
| Flammability | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Flammability Classification | HB | IEC 60695-11-10, -20 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 80 | °C | |
| Drying Time | 4.0 - 8.0 | hr | |
| Suggested Max Moisture | 0.10 | % | |
| Processing (Melt) Temp | 280 - 300 | °C | |
| Mold Temperature | 80 - 120 | °C |
| Note Message | |
|---|---|
| 1 . | Moist |
| 2 . | Dry |
| 3 . | Through-plane |
| 4 . | In-plane |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| RTP 2181 TFE 15 SI 2 | RTP Company | PEI | RTP |
| Ravalene CR LS 5241 | Ravago Group | LDPE | Ravalene |
| Boltaron 3015 TruPrint | Boltaron Performance Products | PVC, Rigid | Boltaron |
| APEX® 3200-68NT | Teknor Apex Company | PVC, Flexible | APEX® |
| LEXAN™ VR2220 resin | SABIC Innovative Plastics | PC | LEXAN™ |
