Order Products : sales@su-jiao.com
CERTENE™ PBM-12AN
| Category: | PP Impact Copolymer , Polypropylene Impact Copolymer |
| Manufacturer: | Muehlstein |
| Trademark: | CERTENE™ |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | MMpqfM_CERTENE-PBM-12AN.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| PBM-1A2N is a certified prime grade High-Impact Nucleated injection molding copolymer formulated with Antistatic. It offers easy processability, protection against static generation, improved crystallization rate for faster cycles, good low temperature Impact resistance, very good dimensional stability, and excellent balance of mechanical properties. PBM-12AN typical applications include automotive and appliance parts, Industrial components, caps, closures and housewares. PBM-12AN complies with FDA regulation 21CFR 177.1520 (a)(3)(i) / (c)3.1 + 3.2, and most international regulations concerning the use of Polypropylene in contact with food. |
| General Information | |
|---|---|
| Additive |
|
| Features |
|
| Uses |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.900 | g/cm³ | ASTM D1505 |
| Melt Mass-Flow Rate (MFR) (230°C/2.16 kg) | 12 | g/10 min | ASTM D1238 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Rockwell Hardness (R-Scale) | 80 | ASTM D785 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength 1(Yield, Injection Molded) | 27.6 | MPa | ASTM D638 |
| Tensile Elongation 2(Yield, Injection Molded) | 4.0 | % | ASTM D638 |
| Flexural Modulus - 1% Secant 3(Injection Molded) | 1280 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact (23°C, Injection Molded) | 190 | J/m | ASTM D256 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load (0.45 MPa, Unannealed, Injection Molded) | 104 | °C | ASTM D648 |
| Vicat Softening Temperature | 135 | °C | ASTM D1525 |
| Additional Information |
|---|
| All specimens were injection molded according to ASTM D2146 Type 1. |
| Note Message | |
|---|---|
| 1 . | 50 mm/min |
| 2 . | 50 mm/min |
| 3 . | 1.3 mm/min |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Promyde® B27 | NUREL, S.A. | Nylon 6 | Promyde® |
| Teflon® PTFE 6CN X | DuPont Fluoropolymers | PTFE | Teflon® PTFE |
| CERTENE™ LLHC-217A | Muehlstein | LLDPE | CERTENE™ |
| Electrafil® PA6/6 GF10 BK | Techmer Engineered Solutions | Nylon 66 | Electrafil® |
| Mafill® CR XM 8144 | Ravago Group | PP, Unspecified | Mafill® |
