Order Products : sales@su-jiao.com
RTP 2101 HF
| Category: | PEI , Polyether Imide |
| Manufacturer: | RTP Company |
| Trademark: | RTP |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | MMbRTe_RTP-2101-HF.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Warning: The status of this material is 'Commercial: Limited Issue' The data for this material has not been recently verified. Please contact RTP Company for current information prior to specifying this grade. |
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Features |
|
| RoHS Compliance |
|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.35 | g/cm³ | ASTM D792 |
| Molding Shrinkage - Flow | ASTM D955 | ||
| 3.18 mm, Injection Molded | 0.50 | % | |
| 6.35 mm, Injection Molded | 0.60 | % | |
| Water Absorption (23°C, 24 hr) | 0.24 | % | ASTM D570 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Modulus (Injection Molded) | 5510 | MPa | ASTM D638 |
| Tensile Strength | 124 | MPa | ASTM D638 |
| Tensile Elongation (Yield, Injection Molded) | 4.0 | % | ASTM D638 |
| Flexural Modulus (Injection Molded) | 4480 | MPa | ASTM D790 |
| Flexural Strength (Injection Molded) | 183 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact (3.18 mm, Injection Molded) | 43 | J/m | ASTM D256 |
| Unnotched Izod Impact (3.18 mm) | 480 | J/m | ASTM D4812 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load (1.8 MPa, Unannealed, Injection Molded) | 204 | °C | ASTM D648 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Rear Temperature | 349 to 382 | °C | |
| Middle Temperature | 349 to 382 | °C | |
| Front Temperature | 349 to 382 | °C | |
| Mold Temperature | 135 to 177 | °C | |
| Injection Pressure | 83.0 to 124 | MPa |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Maxxam™ F5134T4-1 | PolyOne Corporation | PP Homopolymer | Maxxam™ |
| SOFTAPLAS S 65A | Ovation Polymers Inc. | TPE | SOFTAPLAS |
| TITANPRO® EPC40R | Lotte Chemical Titan (M) Sdn. Bhd. | PP Impact Copolymer | TITANPRO® |
| Andur 7-3 APLF | Anderson Development Company | PUR-Ester/TDI | Andur |
| Petrothene® XL07414 | LyondellBasell Industries | Polyolefin, Unspecified | Petrothene® |
