Order Products : sales@su-jiao.com
Formolene® 5143N
| Category: | PP Homopolymer , Polypropylene Homopolymer |
| Manufacturer: | Formosa Plastics Corporation, U.S.A. |
| Trademark: | Formolene® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | MM9oMk_Formolene-5143N.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Formolene® 5143N is a higher melt flow polypropylene homopolymer designed for faster cycle time and excellent clarity. It contains a unique combination of stabilizers and nucleation that provide an excellent balance of stiffness and impact strength. Formolene® 5143N does not contain animal derived ingredients, and is suitable for high temperature food processing and preparation. Formolene® 5143N meets all requirements of the U. S. Food and Drug Administration as specified in 21 CFR 177.1520, covering safe use of polyolefin articles and components of articles intended for direct food contact. Additionally, it meets FDA requirements regarding retort food processing. |
| General Information | |
|---|---|
| Additive |
|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.900 | g/cm³ | ASTM D1505 |
| Melt Mass-Flow Rate (MFR) (230°C/2.16 kg) | 3.0 | g/10 min | ASTM D1238 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength 1(Yield) | 38.6 | MPa | ASTM D638 |
| Tensile Elongation 2(Yield) | 7.0 | % | ASTM D638 |
| Flexural Modulus - 1% Secant 3 | 1720 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact (23°C) | 43 | J/m | ASTM D256 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load (0.45 MPa, Unannealed) | 118 | °C | ASTM D648 |
| Note Message | |
|---|---|
| 1 . | 50 mm/min |
| 2 . | 50 mm/min |
| 3 . | 1.3 mm/min |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Polytron® A60N02 | Polyram Ram-On Industries | Nylon 66 | Polytron® |
| 4DUR® 9K20500 | 4Plas | PBT | 4DUR® |
| Baytec® GS-V85A (82A) | Covestro - PUR | TSU | Baytec® |
| ESTABLEND 8500 V0 HF | Cossa Polimeri S.r.l. | ASA+PC | ESTABLEND |
| LNP™ LUBRILOY™ D2000P compound | SABIC Innovative Plastics | PC | LNP™ LUBRILOY™ |
