Order Products : sales@su-jiao.com
Lusep® GP2400
| Category: | PPS , Polyphenylene Sulfide |
| Manufacturer: | LG Chem Ltd. |
| Trademark: | Lusep® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | MH9RV6_Lusep-GP2400.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Description General Purpose Application Pump Units, Motor Units, etc. |
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Features |
|
| Uses |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.65 | g/cm³ | ASTM D792 |
| Molding Shrinkage - Flow (3.20 mm) | 0.10 to 0.20 | % | ASTM D955 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength 1(Break, 3.20 mm) | 152 | MPa | ASTM D638 |
| Tensile Elongation 2(Break, 3.20 mm) | 1.0 to 2.0 | % | ASTM D638 |
| Flexural Modulus 3(3.20 mm) | 11800 | MPa | ASTM D790 |
| Flexural Strength 4(Yield, 3.20 mm) | 226 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact (23°C, 3.20 mm) | 69 | J/m | ASTM D256 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load 5(0.45 MPa, Unannealed, 6.40 mm) | > 250 | °C | ASTM D648 |
| Flammability | Nominal Value | Test Method | |
|---|---|---|---|
| Flame Rating (0.750 mm) | V-0 | UL 94 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 100 to 120 | °C | |
| Drying Time | 2.0 to 4.0 | hr | |
| Suggested Max Moisture | < 0.020 | % | |
| Rear Temperature | 300 | °C | |
| Middle Temperature | 310 | °C | |
| Front Temperature | 320 | °C | |
| Nozzle Temperature | 330 | °C | |
| Processing (Melt) Temp | 300 to 330 | °C | |
| Mold Temperature | 120 to 150 | °C | |
| Screw Speed | < 100 | rpm |
| Note Message | |
|---|---|
| 1 . | 5.0 mm/min |
| 2 . | 5.0 mm/min |
| 3 . | 1.3 mm/min |
| 4 . | 1.3 mm/min |
| 5 . | 4.6kg |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| RELENE® HD50MA180 | Reliance Industries Limited | HDPE | RELENE® |
| TITANZEX® HB6200 | Lotte Chemical Titan (M) Sdn. Bhd. | HDPE | TITANZEX® |
| ADMER™ NF498E | Mitsui Chemicals Europe GmbH | LLDPE | ADMER™ |
| Halar® 500LC | Solvay Specialty Polymers | ECTFE | Halar® |
| Perfactory® LS600 | EnvisionTEC, Inc. | Acrylic, Unspecified | Perfactory® |
